Amplifier mounting locations?

Knockoutpie

Update: as I'm not going to drill anything behind the driver or passenger seat due to that's where the fuel tank location is. It's really the only place I can mount it. It's 14" long by 11" height and 2" depth. It will not fit under the seats. Too long and too tall. I can put it behind the passenger seat. My solution here is to use industrial Velcro stickied onto the back of the amp and the Velcro to the carpet. Tbh it works really quite well and I suppose it's easily accessible.

The seat will go back all the way excluding the last final notch, I think this is fine as I rarely have passengers and if I do, they aren't 6' tall.

So my solution to the behemoth amplifier is behind the passenger seat with Velcro!

image.jpg

Jayhovah

Should work fine... I did the same with some amps on my del sol when I was in college... However, my passenger would occasionally move the seat back against the amp without my noticing and after a while it would shut down in thermal protection.

edit: If you wanted to avoid this occasional annoying occurrence, you could add some little stops or something to keep the seat from moving all the way back.

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

Knockoutpie

Great point. I'll stick the amp to a very thin 1/8 board, just thick enough to where it won't bend. So it can still breathe even if crushed back