another steering wheel controls issue (Help! Please!)

solteroblues

I've searched the forums and I've found a ton of threads about this, so I'm sorry, but it doesn't seem that any of them solve my problem.

I bought the Pioneer App Radio 4, and I have a '12 370 Base. I also bought the ASWC-1 steering wheel controller because everything I've seen on here, this is the one that most people have had success with. I took it to a local professional shop to have it all installed on a Saturday. They couldn't get the adapter to work at all, so they had a PAC something or another in their shop, and they couldn't get that to work either. They spent about 8 hours on my install and couldn't get either to work, so they told me to bring it back in during the week so they could call tech support. They also said that they would try one of the older PAC units that doesn't have the automatic programming function, but that it usually works without issues, they just needed to order it.

So I took it back this week, after they got the new (old style) PAC adapter. After fooling with it for 4 hours, they tried all 3 different adapters, and still couldn't get anything to work. They called tech support for both PAC and the ASWC-1, they tried two different PAC units, I showed them the threads on here of how others have gotten it to work, but still to no avail. The tech support for either company hasn't been of any help at all...

Do you have any idea what they could be doing wrong? At this point, I think it's the shop that has the issue, but they are doing all of the extra work for free... but I am getting tired of taking it back to them. I don't even know for sure what kind of issues they're having, but I don't think they can even get a single button working, unlike some people that have at least gotten the volume to work. They want me to bring it back for a third time when the owner will be back next week, so I want to be able to give them some kind of installation steps to make it work!

Thanks!

night blade

It could be the Pioneer App Radio 4, I had a JVC deck that refused to work with the AWSC-1 after a firmware update, the AWSC-1 might need to be updated to work with the newer Pioneer.

One thing they could try, since they're spending so much time on it, would be to install another deck to confirm it's the Pioneer or the AWSC is the problem.

__________________
2016 Nissan 370z Base 6MT Pearl White | RJM Performance
2012 Kia Sportage 6AT (the short bus)

solteroblues

thanks, I'll suggest that to them, too. But if it is the radio, I'm out of luck, because I bought it somewhere else, so they wouldn't do a swap... I hope that isn't the issue!

bigaudiofanat

As I suggested in the PM I sent you. MAKE SURE THEY'RE SOLDERING! I can't count the number of times a steering wheel controller would not work because of the resistance because of some kind of crimp or t tap. Also, make sure they grounded the black wire in the factory harness as this needs to be done. One last thing I thought of yesterday was that they could only be trying to match the colors and not counting the pins from the wiring side. Check that as well.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/