Wiring Problems

Jayhovah · 07-22-2016, 10:42 AM

[QUOTE=NZ.Z;3521371]

Quote:

Originally Posted by Jayhovah

How are you tapping the mirror wires? Invisicord?

Using a telephone cable not Invisicord.

How are you physically tapping the wires? wire taps? strip/twist/tape? Jamming bare wire into the connector?

NZ.Z · 07-22-2016, 04:15 PM

I've just jammed them in.

Jayhovah · 07-24-2016, 09:43 AM

Quote:

Originally Posted by NZ.Z

I've just jammed them in.

Stranded wire? You might try crimping on some leads or tinning the ends with some solder.

If by some chance you are using a solid core wire, throw it away. You've probably messed around with it enough that it has gone intermittent on you.

The mirror can supply plenty of current as many people are using the Invisicord for their detectors... which still leads me to believe you are just getting poor contact.

NZ.Z · 07-29-2016, 02:15 AM

Hey, I'd just like to thank you all for your help and suggestions with this problem.
It has now been fixed and working just fine.
Jayhovah finally cracked it for me I recon.
I've shortened the cable which was 8' long (just in case I had to run it down to the fuse box) and is now only 6" long. I also soldered the wire ends before connecting and it fired up first time.

I really appreciate the help and patience that you fellas gave.

Here's a big THANK YOU to you all.

Jayhovah · 07-29-2016, 01:07 PM

Quote:

Originally Posted by NZ.Z

Hey, I'd just like to thank you all for your help and suggestions with this problem.
It has now been fixed and working just fine.
Jayhovah finally cracked it for me I recon.
I've shortened the cable which was 8' long (just in case I had to run it down to the fuse box) and is now only 6" long. I also soldered the wire ends before connecting and it fired up first time.

I really appreciate the help and patience that you fellas gave.

Here's a big THANK YOU to you all.

8'!! Probably a combo of poor contact and too much resistance from a tiny conductor at 8' length. Glad you got it figured out!

Sent from my Nexus 6 using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bose/nav adding subs, need help with wiring LC2i w/factory wiring	Funkdoobiest	Audio & Video	7	01-10-2016 08:15 PM
Wiring help please!	valpozguy	Engine & Drivetrain	6	11-13-2015 10:24 AM
Sub Wiring	cfleming2226	Audio & Video	4	01-27-2011 10:43 AM
Wiring Help!	Gmendez	Audio & Video	12	11-10-2010 02:27 PM
re-wiring to keep vdc off	boosted180	DIY Section (Do-It-Yourself)	26	02-01-2010 12:12 PM

07-22-2016, 04:15 PM	#17 (permalink)
NZ.Z Base Member Join Date: Jan 2016 Location: Tauranga, New Zealand Posts: 39 Drives: 09 370z, platinum t. Rep Power: 9	I've just jammed them in.

07-29-2016, 02:15 AM	#19 (permalink)
NZ.Z Base Member Join Date: Jan 2016 Location: Tauranga, New Zealand Posts: 39 Drives: 09 370z, platinum t. Rep Power: 9	Hey, I'd just like to thank you all for your help and suggestions with this problem. It has now been fixed and working just fine. Jayhovah finally cracked it for me I recon. I've shortened the cable which was 8' long (just in case I had to run it down to the fuse box) and is now only 6" long. I also soldered the wire ends before connecting and it fired up first time. I really appreciate the help and patience that you fellas gave. Here's a big THANK YOU to you all.