Wiring Problems

NZ.Z

I'm trying to tap an rj11 phone cable into a 2009 Touring 370Z rearview mirror to run my mirror mount Bel Magnum radar detector.
When the wires are connected, the detector doesn't switch on, but makes a constant clicking sound.
What am I doing wrong?
Please Help.

NZ.Z

Any body

SouthArk370Z

Pinout for the connector should be in the FSM. Double-check your wiring.

If you didn't use the proper tool to makeup the RJ-11 connector, you probably screwed it up.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

NZ.Z

Hey, thanks for your help SouthArk.
The Rj-11 is wired up Ok as it works fine on the interior lights or the main lights or even direct to the battery.
It's when I connect to the power rear view mirror that all I get is clicking from the detector, as if not enough power to switch the detector on fully.
Unfortunately the FSM that I have doesn't have any wiring diagrams and I can't find any on the net either!

SouthArk370Z

Check the voltage at the mirror connector (unplugged) and at the detector (plugged in).

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

NZ.Z

Hey, thanks again for your input SouthArk.

I've tested the voltage on the mirror and it's the same as the interior and mood lighting. This is why I'm completely stumped.
The detector works with the mood light, but you need your lights on for that to work, and it works with the interior lights but stays on permanently and doesn't switch off with the ignition.

SouthArk370Z

I'd measure the voltage at the detector. My guess is that you are not tapped into a 12V line or the load of the detector is pulling more current than the wiring can handle causing the voltage to drop when the detector is turned on.

I vaguely remember there being a thread on here about someone doing something similar. Use any of the major web search engines and add "site:the370z.com" to your search string.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

bigaudiofanat

The ground wire that is in the harness probably is not good enough for the detector. I would try a solid metal location.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

NZ.Z

Thanks again for your input SouthArk, even though I've been through the internet I'll give your suggestion of the site:the370z.com a trolling aswell.

Also like to thank bigaudiofanat for his suggestion. I'd already tried that one though and it made no difference.

Onwards and upwards

bigaudiofanat

Actually. come to think of it, I believe your radar has a transformer inside the cig plug. So it would make sense why your not able to power it up. You either need the hard wire kit or tear apart the cig plug and hard wire the chip into your mirror.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

NZ.Z

Yeah that would make sense, but how come it still powers up if I wire it to the interior lights or the little orange mood light??

bigaudiofanat

What do you mean? I'm not understanding

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

NZ.Z

Hard wiring the detector up by the mirror using an Rj-11 without running the cable through the headliner and down pillars. If I connect it to the little orange mood light it only powers up when the park or headlights are turned on. If I connect it to the interior lights the power is there constantly and not turned on and off with the ignition. BUT, when I try to wire it to the powered interior mirror, it doesn't power up it just keeps clicking, even though the voltage is the same.

Jayhovah

How are you tapping the mirror wires? Invisicord?

Sounds to me that the circuit, for whatever reason, isn't able to deliver enough current to boot the detector.... My best guess is that you are getting poor contact trying to tap the mirror wires.

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

NZ.Z

[QUOTE=Jayhovah;3521320]How are you tapping the mirror wires? Invisicord?

Using a telephone cable not Invisicord.