Help Deciding on Compatability

itsEz · 11-27-2015, 03:29 PM

Sup guys, i'm working on my audio setup. I have a 12" solo baric old school sub and already got a amp for it. I was thinking of having that in the back in one of these

HTML Code:

http://www.ebay.com/itm/like/301671148001?ul_noapp=true&chn=ps&lpid=82

I bought a pair of Vibe BlackAirs 6x9s

HTML Code:

http://www.amazon.co.uk/BA69-BlackAir-Parcel-Coaxial-Speakers/dp/B00366C21K

Type: Tri axial.
Speaker Size: 6.25" x 9.29".
RMS Power: 175w.
Peak Power: 525w.
Minimum Input: 85w RMS.
Sensitivity: 90 dB.
Frequency Response: 50 Hz - 20 Khz.
Mounting Depth: 93mm.
Mounting Diameter: 6.25" x 9.29" (150 x 222mm).

I'm also leaning towards getting these

HTML Code:

http://shop.vibeaudio.co.uk/index.php?route=product/product&product_id=73

Model : BlackDeath Pro 4 Bullet Tweeter
Configuration : 1 Way Speaker
Size : 4" (100mm)
RMS Power : 100 watts
Peak Power : 300 watts
Minimum Input : 50 watts
Sensitivity : 107 dB
Freq. Response : 1.5 kHz – 20 kHz
Impedance : > 4ohms.
Mounting Depth : 2.6" (65mm)
Mounting Diameter: 3.4" (93mm)
Voice Coil Diameter : 1" (25mm)
Magnet Weight : 20 oz

I was assuming it'd be a good idea to have the pair of BlackAirs and these tweeters on their own amp. Any suggestions on what kind of amp setup, wires, etc?

Thanks

11-27-2015, 03:29 PM	#1 (permalink)
itsEz Base Member Join Date: May 2015 Location: Chattanooga, TN Posts: 59 Drives: 09 Nissan 370Z M6 Rep Power: 10	Help Deciding on Compatability Sup guys, i'm working on my audio setup. I have a 12" solo baric old school sub and already got a amp for it. I was thinking of having that in the back in one of these HTML Code: http://www.ebay.com/itm/like/301671148001?ul_noapp=true&chn=ps&lpid=82 I bought a pair of Vibe BlackAirs 6x9s HTML Code: http://www.amazon.co.uk/BA69-BlackAir-Parcel-Coaxial-Speakers/dp/B00366C21K Type: Tri axial. Speaker Size: 6.25" x 9.29". RMS Power: 175w. Peak Power: 525w. Minimum Input: 85w RMS. Sensitivity: 90 dB. Frequency Response: 50 Hz - 20 Khz. Mounting Depth: 93mm. Mounting Diameter: 6.25" x 9.29" (150 x 222mm). I'm also leaning towards getting these HTML Code: http://shop.vibeaudio.co.uk/index.php?route=product/product&product_id=73 Model : BlackDeath Pro 4 Bullet Tweeter Configuration : 1 Way Speaker Size : 4" (100mm) RMS Power : 100 watts Peak Power : 300 watts Minimum Input : 50 watts Sensitivity : 107 dB Freq. Response : 1.5 kHz – 20 kHz Impedance : > 4ohms. Mounting Depth : 2.6" (65mm) Mounting Diameter: 3.4" (93mm) Voice Coil Diameter : 1" (25mm) Magnet Weight : 20 oz I was assuming it'd be a good idea to have the pair of BlackAirs and these tweeters on their own amp. Any suggestions on what kind of amp setup, wires, etc? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
center console compatability	gshort24	Exterior & Interior	10	10-03-2015 07:21 PM
need help deciding!!	ElvinGTS-T	New Forum Member	18	03-29-2013 05:01 PM
Fender Liner Compatability	gurneyeagle	Exterior & Interior	0	08-01-2012 06:34 PM
Help Deciding on a set of components!	num1johnny	Audio & Video	14	12-03-2010 07:19 PM
Deciding what car to get	Andrew62	Introduction	13	07-27-2009 10:23 AM