The Install Videos

dcrew1x · 11-08-2009, 11:49 PM

Hey sliknik,

Just in case you ever decide to purchase and install the Nismo brace kit, the interior brace attaches to one of the bolts you used for ground at the end of video 5.

If not, no big deal. Just an FYI/heads up just in case

Great videos!

SlikNik · 11-09-2009, 04:16 PM

Quote:

Originally Posted by dcrew1x

Hey sliknik,

Just in case you ever decide to purchase and install the Nismo brace kit, the interior brace attaches to one of the bolts you used for ground at the end of video 5.

If not, no big deal. Just an FYI/heads up just in case

Great videos!

Thanks for the heads up but doubt that would be in my future.
Thanks for the compliments as well. Glad you like them.
More to come soon

I think it offers a little different take on the install than just pictures. Ideally I would have been in a larger garage and had brighter lighting and maybe my wife holding the camera. lol

cdawg410 · 11-09-2009, 05:56 PM

I'm exhausted just from watchin you, if I was ever going to attempt to do any of this stuff myself this video would have been the perfect guide, you are awesome for posting this how-to. As it turns out, I think that I will use my hard earned cash and pay someone else........maybe.

Mike@ZE · 11-10-2009, 04:37 PM

Nice job Nik!

Are you going to be at The Run in December? I'd like to see and hear the setup.

As far as the tweeter mount brackets. If someone can hook me up with a tweeter or the measurements I can make the adaptor brackets on the CNC......

I would need the length x width, the bolt hole size, and distance between the bolt holes.

Mike

bigaudiofanat · 11-10-2009, 04:40 PM

Quote:

Originally Posted by cdawg410

I'm exhausted just from watchin you, if I was ever going to attempt to do any of this stuff myself this video would have been the perfect guide, you are awesome for posting this how-to. As it turns out, I think that I will use my hard earned cash and pay someone else........maybe.

HMMM maybe you would need some help with that install.

SlikNik · 11-15-2009, 04:58 PM

Video 6 now up,
Video #6 http://vimeo.com/7628850

*Head unit ( double din install )

*Z Enclosures tour

*Bass knob install in the dummy switch

getmecoffee · 12-08-2009, 10:13 AM

SlikNik, I wanted to thank you for all the time and effort you spent with sharing these videos with the forum. They are going to be a great help when I do my upgrade.

SlikNik · 12-08-2009, 03:48 PM

Quote:

Originally Posted by getmecoffee

SlikNik, I wanted to thank you for all the time and effort you spent with sharing these videos with the forum. They are going to be a great help when I do my upgrade.

Your welcome getmecoffee! I need to shoot one final video with everything back together and playing as well as a demo of the Eclipse Avn726 HeadUnit.

I miss hearing my Z though when I am driving, but I can't turn the audio down

diablokev87 · 01-06-2010, 12:09 PM

so, just to double check... your amp is now under your zenclousure box?

SlikNik · 01-06-2010, 03:13 PM

Quote:

Originally Posted by diablokev87

so, just to double check... your amp is now under your zenclousure box?

Yes, exact same location as the photo above.

under the ZEnclosure box and under the black foam piece the box rests on.

diablokev87 · 01-06-2010, 03:22 PM

Not worried about any over heating issues?

SlikNik · 01-06-2010, 03:36 PM

Quote:

Originally Posted by diablokev87

Not worried about any over heating issues?

Lots of room down in there and my JLAudio Hd900/5 runs pretty cool.
I live in Florida so my ac is usually on as well.
This recent cold front that has pushed down into Tampa is crazy. Highs only around 50 degrees for days now. I am over it, bring back 90 soon

diablokev87 · 01-06-2010, 03:38 PM

Thats cool. Im currently specing out a system that i want to install during the spring time. I feel that i am going to have a hard time finding locations to place 2 amps, power and ground distribution box, cap, and cross overs.

SlikNik · 01-06-2010, 03:49 PM

Quote:

Originally Posted by diablokev87

Thats cool. Im currently specing out a system that i want to install during the spring time. I feel that i am going to have a hard time finding locations to place 2 amps, power and ground distribution box, cap, and cross overs.

I put my crossovers under the seats. I think you could fit 2 amps in where my amp is if they are the new small type that many audio companies are making now.

As far as the cap, not sure where you could put that.

Good luck with your install

diablokev87 · 01-06-2010, 03:54 PM

Ah, thats where you put the cross overs. Ok, that makes sense. I still have quite a bit of time. Ill just do some measurements and hope two amps can fit in that area. The cap can always go behind a seat.

O man wiring will be fun.

Thanks. Hopefully i can make this happen in the spring time.

11-08-2009, 11:49 PM	#31 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 369	Hey sliknik, Just in case you ever decide to purchase and install the Nismo brace kit, the interior brace attaches to one of the bolts you used for ground at the end of video 5. If not, no big deal. Just an FYI/heads up just in case Great videos! azza12311 likes this. __________________ 2009 PG 6MT Sports Stillen Gen3 CAI \| Stillen CBE \| AMS Short Shifter \| Nismo Brace Kit

11-10-2009, 04:37 PM	#34 (permalink)
Mike@ZE The370Z.com Sponsor Join Date: Apr 2009 Location: Florida Posts: 22 Drives: 05 350z PPW M6 Rep Power: 25	Nice job Nik! Are you going to be at The Run in December? I'd like to see and hear the setup. As far as the tweeter mount brackets. If someone can hook me up with a tweeter or the measurements I can make the adaptor brackets on the CNC...... I would need the length x width, the bolt hole size, and distance between the bolt holes. Mike __________________ 2005 350Z PPW 6sp - 380whp/402tq @9psi - retired BMW 335i Coupe 6sp Auto

11-15-2009, 04:58 PM	#36 (permalink)
SlikNik Enthusiast Member Join Date: May 2009 Location: Florida Posts: 294 Drives: 2015 Corvette Z51 Rep Power: 18	Video 6 now up, Video #6 http://vimeo.com/7628850 Head unit ( double din install ) Z Enclosures tour Bass knob install in the dummy switch Last edited by SlikNik; 11-16-2009 at 04:03 PM.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
check out my track videos	Bushguts	Other Vehicles	5	07-13-2009 10:23 AM
370z vs GT-R - 2 x Youtube videos	chubbs	Nissan 370Z Photos / Spyshots / Video / Media Gallery	3	05-19-2009 02:51 PM
Acceleration Videos	DonWolfo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	4	03-04-2009 01:09 PM
Music~videos	nogoodname	The Lounge (Off Topic)	38	12-17-2008 12:11 AM
More videos from GT channel	Dav	Nissan 370Z Photos / Spyshots / Video / Media Gallery	4	12-03-2008 08:27 PM

11-09-2009, 05:56 PM	#33 (permalink)
cdawg410 Base Member Join Date: May 2009 Location: alexandria, va Posts: 238 Drives: 2009 370z Rep Power: 16	I'm exhausted just from watchin you, if I was ever going to attempt to do any of this stuff myself this video would have been the perfect guide, you are awesome for posting this how-to. As it turns out, I think that I will use my hard earned cash and pay someone else........maybe.

12-08-2009, 10:13 AM	#37 (permalink)
getmecoffee Base Member Join Date: Nov 2009 Location: NY Posts: 52 Drives: Nissan 370Z Rep Power: 16	SlikNik, I wanted to thank you for all the time and effort you spent with sharing these videos with the forum. They are going to be a great help when I do my upgrade.

01-06-2010, 12:09 PM	#39 (permalink)
diablokev87 Base Member Join Date: Aug 2009 Location: Queens NY Posts: 246 Drives: 09 Niss 370Z Blue A7 Rep Power: 16	so, just to double check... your amp is now under your zenclousure box?

01-06-2010, 03:22 PM	#41 (permalink)
diablokev87 Base Member Join Date: Aug 2009 Location: Queens NY Posts: 246 Drives: 09 Niss 370Z Blue A7 Rep Power: 16	Not worried about any over heating issues?

01-06-2010, 03:38 PM	#43 (permalink)
diablokev87 Base Member Join Date: Aug 2009 Location: Queens NY Posts: 246 Drives: 09 Niss 370Z Blue A7 Rep Power: 16	Thats cool. Im currently specing out a system that i want to install during the spring time. I feel that i am going to have a hard time finding locations to place 2 amps, power and ground distribution box, cap, and cross overs.

01-06-2010, 03:54 PM	#45 (permalink)
diablokev87 Base Member Join Date: Aug 2009 Location: Queens NY Posts: 246 Drives: 09 Niss 370Z Blue A7 Rep Power: 16	Ah, thats where you put the cross overs. Ok, that makes sense. I still have quite a bit of time. Ill just do some measurements and hope two amps can fit in that area. The cap can always go behind a seat. O man wiring will be fun. Thanks. Hopefully i can make this happen in the spring time.