Install price?

RonRizz

Spoke with a friend of mine who owns a brick and mortar shop locally here in PA. Last night. He priced this install at just under $350

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

JC-Nismo

I would keep my car stock if the only shop in town gave me that dam estimate. I did my own install, no expert, but I'm pretty decent as I've been doing my own installs since a teenager.

Apex2Apex

I appreciate the feedback.

I ordered the parts through Amazon last night. Thanks to same day shipping they arrived this morning. Head unit is out, now I'm off to the DIY to figure out wtf some of the cables are for lol.

YzGyz

It's easy. If you get stuck, take a picture or two of whatever it is that confused you and people will help. Lots of brains on this forum.

I would advise you adding a back up cam and extra RCA line to the list. Back up cams are cheap so it would be a good idea to install it while your already at it. The other thing is to hook up the extra RCA to the subwoofer like and just run that to the amp area. I don't see a Sub on your list (yet), but once you install the new speakers, you might reconsider. All you would have to do is split the power, ground, and remote wire to the sub amp, plug the sub RCA in, and run wires to the sub and your set.

YzGyz

__________________
http://www.the370z.com/members-370z-...gyzs-turn.html

YzGyz

Apex2Apex

I'm just doing the head unit now. I will get to the amp after I purchase the zenclosure and probably add the back up cam when I do that. I'm al ready stuck so pictures will come shortly lol.

JC-Nismo

Once you get your harness connected, it will be plug and play.

Apex2Apex

The ASWC has a connector that I have no idea where it goes. I'm sure I could figure out the wires but the connector is different story.

RonRizz

There is a thread on here that deals solely with the steering wheel controls...look in the stickies

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

DeliriousClam

If this popped up where I work you'd be looking at $250 for all labor...

$70 TO INSTALL ASWC? WHAT THE ****?

__________________
Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet
MECP Advanced: CEA26671
Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

kenchan

well only bigaudiofanat knows how to install that pos correctly within 5min on a Z so i think there is much head scratching time included.


i did install an ASWC in my dd in other 5min with no issue so i guess its not ENTIRELY a pos... just a little pos-tty

bigaudiofanat

Lol they are not a pos and very easy to install.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

DeliriousClam

I agree it's not a POS but I think the Maestro is better

__________________
Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet
MECP Advanced: CEA26671
Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

Apex2Apex

Ironically, after watching the video, that appears to be the easiest thing to install

kenchan

and dat is part of the misconception with ASWC. you need to have the latest firmware or it does not work properly. 99% of the time, people can't get it to run first try on the Z. the 1% success rate is Big himself.

BoneZ

Guess I'm in the 1%. I just hooked mine up per instruction and it simply works. Held down one button, turned on the car and the rest is history.