Aftermarket Alarm Features with Factory "Alarm"??

zero610 · 10-26-2009, 09:05 AM

Is there anyway to integrate some aftermarket alarm features into the factory alarm? Basically, something like a glass break sensor and motion sensor is what I'm looking for. I'm wanting to stop the window breaking and stereo theft more than the actual car theft.

If I get an aftermarket alarm, I would have to use both FOBs, right? Ideally, I want to continue to use my factory FOB to lock/unlock (being able to keep it in my pocket) while that also activates the motion sensor/glass break sensor.

If there is no way to do the above, how would a full aftermarket alarm work with the intelligent key? I would have to keep the intelli key in my pocket at all times, but would lock/unlock/arm alarm with the new FOB from the alarm system? If I unlocked the car with the button on the door, would that also disarm the alarm?

Any help on this is appreciated. Thanks.

Snakes709 · 10-26-2009, 09:24 AM

Thats the same issue im having now. Alot of places dont have the wiring harness for either a aftermarket alarm or auto starter. From what i been told is you have to replace the alarm with a full aftermarket alarm...im going to use Viper 2 for my example because thats the alarm i had on my old car.

Like you already figured, if you have a aftermarket alarm that will control the alarm, lock,unlock and trunk. However you still need your factory FOB to start the car. I'm pretty sure your factory fob can still lock/unlock the car but it wont turn your alarm on/off. So in other words you will need both the aftermarket fob and your factory fob with you.

zero610 · 10-26-2009, 09:57 AM

And I'm guessing when you press the door button to unlock the car, the alarm will still be active, so you will have to press the alarm remote as well? That sucks! Anyone have better news!?

Zeto · 10-26-2009, 10:49 AM

In for updates.

vipor · 10-26-2009, 01:01 PM

I'll be installing a full 2 way remote start alarm on my Z within the next month or two. I've already done some research involving the factory alarm arm/disarm function as well as the CAN-Bus interface. It looks like it won't be too difficult, but I'm unsure how the factory door handle arming will end up working out. I'll have a front and rear shock sensor, (2) vertical motion (jacking) sensors, a back up battery, and a glass break. I'll be doing a complete write up on the process.

Pertaining to the motion sensor... don't do it unless you have a convertible or jeep. They false very easily due to the metal in your car. Unfortunately your only realistic and reliable detection will be the glass break, door sensors, and shock sensor.

vipor · 10-26-2009, 01:05 PM

Quote:

Originally Posted by Snakes709

Thats the same issue im having now. Alot of places dont have the wiring harness for either a aftermarket alarm or auto starter. From what i been told is you have to replace the alarm with a full aftermarket alarm...im going to use Viper 2 for my example because thats the alarm i had on my old car.

Like you already figured, if you have a aftermarket alarm that will control the alarm, lock,unlock and trunk. However you still need your factory FOB to start the car. I'm pretty sure your factory fob can still lock/unlock the car but it wont turn your alarm on/off. So in other words you will need both the aftermarket fob and your factory fob with you.

Typically the alarm will have a pulse to arm or disarm the factory alarm. Also, remote start systems have outputs to disable the factory alarm before remote starting so as to not make the car think it's being stolen. The CAN-Bus interface talks directly to the car and makes it think the Fob is in the under-dash port so it will start without you there. Being that it doesn't use a prox technology noone should be able to come up and unlock the doors while it's started. Now that I think about it the factory disarm will probably unlock the doors so a secondary pulse would need to be sent to lock the doors after the factory alarm is disarmed. Easy to do.

Snakes709 · 10-26-2009, 01:12 PM

might be easy to do but are these "pulses" on the same freq.

zero610 · 10-26-2009, 01:34 PM

Yours is definitely more complicated than i'm looking for. Ideally, I want to just add a glass break and vertical motion sensor to the factory alarm. Is that impossible? I don't want 2 FOBs (car and alarm) to have to carry and use.

vipor · 10-26-2009, 01:46 PM

Quote:

Originally Posted by Snakes709

might be easy to do but are these "pulses" on the same freq.

By "pulse" I mean a hardwired ground or positive voltage wire tapped into the BCM or otherwise, not wireless.

vipor · 10-26-2009, 01:49 PM

Quote:

Originally Posted by zero610

Yours is definitely more complicated than i'm looking for. Ideally, I want to just add a glass break and vertical motion sensor to the factory alarm. Is that impossible? I don't want 2 FOBs (car and alarm) to have to carry and use.

Theoretically it is possible, but may require wiring into a door trigger to notice the factory "alarm." Not the most ideal solution, but it's not like the factory system is going to have inputs for aftermarket sensors.

zero610 · 10-26-2009, 02:19 PM

Car Alarm Glass Sensor By Asianwolf Vehicle Security Manufacturer

Would that work? Seems simple. The only thing it seems to figure out is where to put the blue wire (negative sensor input of alarm). Surely that could be tapped from the factory wire...??

USNA94 · 10-26-2009, 02:37 PM

I was able to add that capability by upgrading the factory KARR alarm when I purchased from dealer. It added the ability to detect window be broken so it is possible if this is what you are looking for. My give your dealer a call.

zero610 · 10-26-2009, 02:51 PM

Dealer said there is nothing from Nissan - yours must be an aftermarket thing the dealer installed. Do you have a separate Key FOB for your alarm or is the arm/disarm all done through the Nissan intellikey?

USNA94 · 10-26-2009, 02:59 PM

No seperate FOB for alarm, just the standard FOB for starting.

flashburn · 10-26-2009, 03:50 PM

This is something I've been wondering too.

10-26-2009, 09:05 AM	#1 (permalink)
zero610 Base Member Join Date: Jan 2009 Location: Houston, TX Posts: 89 Drives: 09 370Z Sport Rep Power: 16	Aftermarket Alarm Features with Factory "Alarm"?? Is there anyway to integrate some aftermarket alarm features into the factory alarm? Basically, something like a glass break sensor and motion sensor is what I'm looking for. I'm wanting to stop the window breaking and stereo theft more than the actual car theft. If I get an aftermarket alarm, I would have to use both FOBs, right? Ideally, I want to continue to use my factory FOB to lock/unlock (being able to keep it in my pocket) while that also activates the motion sensor/glass break sensor. If there is no way to do the above, how would a full aftermarket alarm work with the intelligent key? I would have to keep the intelli key in my pocket at all times, but would lock/unlock/arm alarm with the new FOB from the alarm system? If I unlocked the car with the button on the door, would that also disarm the alarm? Any help on this is appreciated. Thanks.

10-26-2009, 01:01 PM	#5 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	I'll be installing a full 2 way remote start alarm on my Z within the next month or two. I've already done some research involving the factory alarm arm/disarm function as well as the CAN-Bus interface. It looks like it won't be too difficult, but I'm unsure how the factory door handle arming will end up working out. I'll have a front and rear shock sensor, (2) vertical motion (jacking) sensors, a back up battery, and a glass break. I'll be doing a complete write up on the process. Pertaining to the motion sensor... don't do it unless you have a convertible or jeep. They false very easily due to the metal in your car. Unfortunately your only realistic and reliable detection will be the glass break, door sensors, and shock sensor. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Motortrend Article: "2009 Best Drivers Car" features Nismo 370z.	Phimosis	Track / Autocross / Drifting / Dragstrip	5	09-07-2009 06:25 PM
Reliability of Factory Alarm	drdre8424	Nissan 370Z General Discussions	9	08-30-2009 05:31 AM
Upgrading the "Alarm"?	kannibul	Audio & Video	15	08-08-2009 12:27 PM
370Z Factory "Fairlady Z" Emblems in stock, At the 350ZSOURCE!!!	Michael@TheZStore	Exterior & Interior	13	08-01-2009 11:59 AM
favorite aftermarket alarm?	Forrest	Nissan 370Z General Discussions	10	03-20-2009 05:38 PM

10-26-2009, 09:24 AM	#2 (permalink)
Snakes709 A True Z Fanatic Join Date: Aug 2009 Location: Edmonton Posts: 1,205 Drives: 2011 Evo-X GSR Rep Power: 18	Thats the same issue im having now. Alot of places dont have the wiring harness for either a aftermarket alarm or auto starter. From what i been told is you have to replace the alarm with a full aftermarket alarm...im going to use Viper 2 for my example because thats the alarm i had on my old car. Like you already figured, if you have a aftermarket alarm that will control the alarm, lock,unlock and trunk. However you still need your factory FOB to start the car. I'm pretty sure your factory fob can still lock/unlock the car but it wont turn your alarm on/off. So in other words you will need both the aftermarket fob and your factory fob with you.

10-26-2009, 09:57 AM	#3 (permalink)
zero610 Base Member Join Date: Jan 2009 Location: Houston, TX Posts: 89 Drives: 09 370Z Sport Rep Power: 16	And I'm guessing when you press the door button to unlock the car, the alarm will still be active, so you will have to press the alarm remote as well? That sucks! Anyone have better news!?

10-26-2009, 10:49 AM	#4 (permalink)
Zeto Track Member Join Date: Apr 2009 Location: North NJ Age: 40 Posts: 766 Drives: 09 Pearl White 370Z Rep Power: 267	In for updates.

10-26-2009, 01:12 PM	#7 (permalink)
Snakes709 A True Z Fanatic Join Date: Aug 2009 Location: Edmonton Posts: 1,205 Drives: 2011 Evo-X GSR Rep Power: 18	might be easy to do but are these "pulses" on the same freq.

10-26-2009, 01:34 PM	#8 (permalink)
zero610 Base Member Join Date: Jan 2009 Location: Houston, TX Posts: 89 Drives: 09 370Z Sport Rep Power: 16	Yours is definitely more complicated than i'm looking for. Ideally, I want to just add a glass break and vertical motion sensor to the factory alarm. Is that impossible? I don't want 2 FOBs (car and alarm) to have to carry and use.

10-26-2009, 02:19 PM	#11 (permalink)
zero610 Base Member Join Date: Jan 2009 Location: Houston, TX Posts: 89 Drives: 09 370Z Sport Rep Power: 16	Car Alarm Glass Sensor By Asianwolf Vehicle Security Manufacturer Would that work? Seems simple. The only thing it seems to figure out is where to put the blue wire (negative sensor input of alarm). Surely that could be tapped from the factory wire...??

10-26-2009, 02:37 PM	#12 (permalink)
USNA94 Base Member Join Date: Aug 2009 Location: San Diego Posts: 54 Drives: 09 Nissan 370Z PG M6 Rep Power: 16	I was able to add that capability by upgrading the factory KARR alarm when I purchased from dealer. It added the ability to detect window be broken so it is possible if this is what you are looking for. My give your dealer a call.

10-26-2009, 02:51 PM	#13 (permalink)
zero610 Base Member Join Date: Jan 2009 Location: Houston, TX Posts: 89 Drives: 09 370Z Sport Rep Power: 16	Dealer said there is nothing from Nissan - yours must be an aftermarket thing the dealer installed. Do you have a separate Key FOB for your alarm or is the arm/disarm all done through the Nissan intellikey?

10-26-2009, 02:59 PM	#14 (permalink)
USNA94 Base Member Join Date: Aug 2009 Location: San Diego Posts: 54 Drives: 09 Nissan 370Z PG M6 Rep Power: 16	No seperate FOB for alarm, just the standard FOB for starting.

10-26-2009, 03:50 PM	#15 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	This is something I've been wondering too.