BoneZ System Build

YzGyz · 09-01-2015, 09:48 AM

Yup, I told you about the resin and glass. It's not to friendly. Add wide flat strip of fabric or something under the box or even attach it to the top. Just two simple handles that would draped flat when not in use but easy to grab and pull to remove the box. Just make sure it's strong enough to handle the pull of the snug for and sub's weight.

YzGyz

BoneZ · 09-01-2015, 09:54 AM

Quote:

Originally Posted by YzGyz

Yup, I told you about the resin and glass. It's not to friendly. Add wide flat strip of fabric or something under the box or even attach it to the top. Just two simple handles that would draped flat when not in use but easy to grab and pull to remove the box. Just make sure it's strong enough to handle the pull of the snug for and sub's weight.

YzGyz

Already did that.

dual nylon pull tab loops, just like the storage bins in the RAV4. I've been playing with fiberglass since 1995, so this isn't the first time it's cut me up like a shiv wielding convict.

BoneZ · 09-06-2015, 09:41 AM

In the middle of my final route, my machine died.

After 16 years of service, I couldn't resuscitate it, even after hot wiring directly to the motor.

Oh well, time to go tool shopping.

YzGyz · 09-06-2015, 10:23 AM

My Dad had one of those Craftman routers. Was nice for the price. I think it came with a small table too. Still waiting on your finish build.

YzGyz

BoneZ · 09-06-2015, 03:34 PM

Back in business.

BoneZ · 09-06-2015, 04:07 PM

Pull tabs installed.

Memphis370Z · 09-06-2015, 04:26 PM

Quote:

Originally Posted by BoneZ

Back in business.

Thumbs up on those Krystals, brother.

BoneZ · 09-06-2015, 05:03 PM

Quote:

Originally Posted by Memphis370Z

Thumbs up on those Krystals, brother.

Krystals are the official vittles of southern wrench heads.

BoneZ · 09-06-2015, 05:05 PM

Damnit, I forgot polyfill. Back out to Walmart again.

Memphis370Z · 09-06-2015, 05:14 PM

Quote:

Originally Posted by BoneZ

Krystals are the official vittles of southern wrench heads.

Indeed. I love those ernyuns.

BoneZ · 09-06-2015, 06:50 PM

Speaker in. Upholstery time

BoneZ · 09-06-2015, 07:31 PM

Enclosure is done! Woo hoo! Perhaps tomorrow I can get the headunit in.

YzGyz · 09-06-2015, 08:02 PM

Have you measure how much air is in there? I used a plastic bag and fit it into a square box with a known cu ft. Then I filled the bag with peanuts. I then removed the bag with peanuts into odd shaped enclosure to see if they are close to each other. It's not exact (can use water for that) but, it's quick and easy estimation.

YzGyz

BoneZ · 09-06-2015, 08:04 PM

I just estimated by squaring off the cylinders. I'm estimating .5 ft³.

BoneZ · 09-07-2015, 01:57 PM

Well, I have hit a stumbling block. I looked up my car on Axxess' web site for my steering wheel control and it's coming back with two sets of instructions. The wires in the Z are red and dark blue. The two wires they connect to on the ASWC-1 are flip flopped in the instructions. I wonder which is right...

09-01-2015, 09:48 AM	#76 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Yup, I told you about the resin and glass. It's not to friendly. Add wide flat strip of fabric or something under the box or even attach it to the top. Just two simple handles that would draped flat when not in use but easy to grab and pull to remove the box. Just make sure it's strong enough to handle the pull of the snug for and sub's weight. YzGyz BoneZ likes this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

09-06-2015, 09:41 AM	#78 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	In the middle of my final route, my machine died. After 16 years of service, I couldn't resuscitate it, even after hot wiring directly to the motor. Oh well, time to go tool shopping. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-06-2015, 10:23 AM	#79 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	My Dad had one of those Craftman routers. Was nice for the price. I think it came with a small table too. Still waiting on your finish build. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

09-06-2015, 03:34 PM	#80 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Back in business. Memphis370Z likes this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-06-2015, 04:07 PM	#81 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Pull tabs installed. aljos and YzGyz like this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-06-2015, 05:05 PM	#84 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Damnit, I forgot polyfill. Back out to Walmart again. Nut_N_Much likes this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-06-2015, 06:50 PM	#86 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Speaker in. Upholstery time aljos and Memphis370Z like this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-06-2015, 07:31 PM	#87 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Enclosure is done! Woo hoo! Perhaps tomorrow I can get the headunit in. aljos, YzGyz, ScottOmatic and 1 others like this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-06-2015, 08:02 PM	#88 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	Have you measure how much air is in there? I used a plastic bag and fit it into a square box with a known cu ft. Then I filled the bag with peanuts. I then removed the bag with peanuts into odd shaped enclosure to see if they are close to each other. It's not exact (can use water for that) but, it's quick and easy estimation. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

09-06-2015, 08:04 PM	#89 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	I just estimated by squaring off the cylinders. I'm estimating .5 ft³. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-07-2015, 01:57 PM	#90 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Well, I have hit a stumbling block. I looked up my car on Axxess' web site for my steering wheel control and it's coming back with two sets of instructions. The wires in the Z are red and dark blue. The two wires they connect to on the ASWC-1 are flip flopped in the instructions. I wonder which is right... zefaulter likes this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Say hi to the BoneZ	BoneZ	New Forum Member	60	09-27-2015 11:01 PM
Your dream system on a $1100 budget – Build it!	SP33DKILLS	Audio & Video	14	04-17-2012 03:12 AM
ARK PERFORMANCE USA dot COM : 370Z/Z34/VQ37 GRIP EXHAUST SYSTEM FULL CATBACK SYSTEM	TeamARK	Intake/Exhaust	25	09-01-2011 12:27 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM
Help me build a system for my Nizmo	BobQ	Audio & Video	8	12-16-2009 09:49 PM