BoneZ System Build

zefaulter · 09-07-2015, 08:58 PM

Quote:

Originally Posted by BoneZ

Well, I have hit a stumbling block. I looked up my car on Axxess' web site for my steering wheel control and it's coming back with two sets of instructions. The wires in the Z are red and dark blue. The two wires they connect to on the ASWC-1 are flip flopped in the instructions. I wonder which is right...

been following your build, great progress I must say!

I'm sure you've already figured it out by now but for what it's worth, Gray/Red to pin 6 and Gray/Blue to pin 16 seems to be the answer. I can't be 100% sure because mine isn't working yet lol I can tell it recognizes my Headunit and wires but it just doesn't auto program

BoneZ · 09-07-2015, 09:09 PM

Quote:

Originally Posted by zefaulter

been following your build, great progress I must say!

I'm sure you've already figured it out by now but for what it's worth, Gray/Red to pin 6 and Gray/Blue to pin 16 seems to be the answer. I can't be 100% sure because mine isn't working yet lol I can tell it recognizes my Headunit and wires but it just doesn't auto program

What color is pin 6?

zefaulter · 09-07-2015, 10:26 PM

Quote:

Originally Posted by BoneZ

What color is pin 6?

Should be blue. the other one is pink. I tried the reverse combo also. It detected my HU incorrectly so I assume this is the right way

BoneZ · 09-08-2015, 07:59 AM

Quote:

Originally Posted by zefaulter

Is that the main headunit harness with the factory speaker and power lines in this picture?

zefaulter · 09-08-2015, 08:52 AM

Quote:

Originally Posted by BoneZ

Is that the main headunit harness with the factory speaker and power lines in this picture?

Yes, it is!

BoneZ · 09-08-2015, 09:07 AM

Quote:

Originally Posted by zefaulter

Yes, it is!

Now I must figure out how to add pins to my aftermarket harness to include those two. Zero cutting.

TarheelGolfer · 09-08-2015, 10:16 AM

Crutchfield recommends using posi tap connectors to connect them to the original wiring.

I haven't started my install yet, but I've been researching it like crazy.

Sent from my Moto X using Tapatalk

BoneZ · 09-08-2015, 10:18 AM

There's a mute wire and an illumination wire my head doesn't use. I may relocate those for the SWC.

BoneZ · 09-08-2015, 05:55 PM

It would seem my email to Axxess did some good. There is now only one set of instructions for the 2012 base.

The gray/blue wire goes to pin 6, which is pink.

The gray/red wire goes to pin 16, which is blue.

Pin 15 (black) needs to be grounded.

Since it would appear these wires aren't needed, I may rearrange them on the harness to make the ASWC-1 install more "cut/tap free."

BoneZ · 09-08-2015, 05:57 PM

zefaulter · 09-10-2015, 09:22 AM

I'm glad they helped you because they've been useless to me. I figured out my problem. It was wrong wiring based on their instructions

BoneZ · 09-10-2015, 09:24 AM

Quote:

Originally Posted by zefaulter

I'm glad they helped you because they've been useless to me. I figured out my problem. It was wrong wiring based on their instructions

But it is grey/red to blue and grey/blue to pink right?

zefaulter · 09-11-2015, 09:12 PM

Quote:

Originally Posted by BoneZ

But it is grey/red to blue and grey/blue to pink right?

not in my case. Pin layout was wrong for me. They look at it the opposite direction maybe:

and Colours for my 2010 Bose were White(6), Grey(16) and Blue(15):

BoneZ · 09-11-2015, 09:26 PM

I hope to find out this weekend which works.

zefaulter · 09-11-2015, 09:52 PM

Quote:

Originally Posted by BoneZ

I hope to find out this weekend which works.

For 2012 with Bose, this is what I found:

6 (W)
16 (GR)
15 (B)

2012 BASE:

6 (P)
16 (L)
15 (B)

( Click to show/hide )

09-08-2015, 10:18 AM	#98 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	There's a mute wire and an illumination wire my head doesn't use. I may relocate those for the SWC. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-08-2015, 05:55 PM	#99 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	It would seem my email to Axxess did some good. There is now only one set of instructions for the 2012 base. The gray/blue wire goes to pin 6, which is pink. The gray/red wire goes to pin 16, which is blue. Pin 15 (black) needs to be grounded. Since it would appear these wires aren't needed, I may rearrange them on the harness to make the ASWC-1 install more "cut/tap free." __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-08-2015, 05:57 PM	#100 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	zefaulter likes this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

09-11-2015, 09:26 PM	#104 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	I hope to find out this weekend which works. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Say hi to the BoneZ	BoneZ	New Forum Member	60	09-27-2015 11:01 PM
Your dream system on a $1100 budget – Build it!	SP33DKILLS	Audio & Video	14	04-17-2012 03:12 AM
ARK PERFORMANCE USA dot COM : 370Z/Z34/VQ37 GRIP EXHAUST SYSTEM FULL CATBACK SYSTEM	TeamARK	Intake/Exhaust	25	09-01-2011 12:27 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM
Help me build a system for my Nizmo	BobQ	Audio & Video	8	12-16-2009 09:49 PM

09-08-2015, 10:16 AM	#97 (permalink)
TarheelGolfer Base Member Join Date: Aug 2015 Location: North Carolina Posts: 18 Drives: 12 Nissan 370z GR M7 Rep Power: 10	Crutchfield recommends using posi tap connectors to connect them to the original wiring. I haven't started my install yet, but I've been researching it like crazy. Sent from my Moto X using Tapatalk

09-10-2015, 09:22 AM	#101 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	I'm glad they helped you because they've been useless to me. I figured out my problem. It was wrong wiring based on their instructions