Tesla styled screen setup

FairladyZ40th · 07-06-2015, 07:37 PM

Dissect a smartphone with the future

Sent from my iPhone using Tapatalk

asorg31 · 07-06-2015, 07:38 PM

Hey everyone I'm rendering a short video of where I'm at right now in the modeling process of the dash. I hope to have it finished and posted tonight so keep tuned and let me know what you think!!

asorg31 · 07-07-2015, 11:07 AM

There were some complications with the video last night, so I wasn't able to get it posted I will be all over it this evening though! Complications or no it's going up!

Venom13132 · 07-07-2015, 01:35 PM

got some more scanning done. Used a different lens set to make the files smaller. Hopefully I will be able to work with these files. They are close to 2gig each instead of 19gig!

I still have some fill in work to get the gaps that I wasnt able to catch with the scanner, but I can do that at home.

asorg31 · 07-07-2015, 01:49 PM

Quote:

Originally Posted by Venom13132

got some more scanning done. Used a different lens set to make the files smaller. Hopefully I will be able to work with these files. They are close to 2gig each instead of 19gig!

I still have some fill in work to get the gaps that I wasnt able to catch with the scanner, but I can do that at home.

Man that looks good! I'm excited to see what you do with it! Keep me posted on your design.

asorg31 · 07-08-2015, 07:16 AM

Alright guys here is a taste, this is a picture of the last frame of the video render that finished super late last night. I will be posting it to YouTube today then re-posting it here to the forum so keep a lookout!

KoolKarmaJoe · 07-08-2015, 10:27 AM

Quote:

Originally Posted by asorg31

Alright guys here is a taste, this is a picture of the last frame of the video render that finished super late last night. I will be posting it to YouTube today then re-posting it here to the forum so keep a lookout!

Wow! I like it. Looks great. I'd like to have a mod like that for my Z.

Sent from my XT1254 using Tapatalk

Trutactix · 07-08-2015, 10:32 AM

I bet a lot of people would rather have this than almost anything else on the market right now, it doesn't seem like there's an easy streamlined way to do it. With that said, please don't charge an arm and a leg to people if you decide to starting selling these

Sent from my iPhone using Tapatalk

asorg31 · 07-08-2015, 10:36 AM

Here is a very short video showing the dash part in full 360 degrees!

asorg31 · 07-08-2015, 10:46 AM

Quote:

Originally Posted by Trutactix

I bet a lot of people would rather have this than almost anything else on the market right now, it doesn't seem like there's an easy streamlined way to do it. With that said, please don't charge an arm and a leg to people if you decide to starting selling these

Hey man that's the goal by the time that I finish this for my car I'm hoping that people love this as much as me and want something like this for their Z as well. My goal is to make this the best that I can and as affordable as possible to! Hell I'm building for me and I like getting the best for my dollar why wouldn't everyone else.

Let's do this and make it happen for everyone!

kidicenj · 07-08-2015, 11:59 AM

Subd

This is an awesome idea!

darkphantom · 07-08-2015, 12:54 PM

OP - what's the source for the tablet here? Was it a custom touch-panel with a mini-itx running in the background?

asorg31 · 07-08-2015, 12:59 PM

Quote:

Originally Posted by darkphantom

OP - what's the source for the tablet here? Was it a custom touch-panel with a mini-itx running in the background?

No tablet here, I'm going to be using a Mini-ITX based computer running an over-sized 15.6 widescreen monitor laid portrait style similar to the Tesla command center. Everything will be concealed behind the monitor except for USB and AUX ports. I'm also going to include a DVD drive bay. Most people don't seem to use them in cars anymore but just in case. It keeps me from having to redesign to add if people request it.

Venom13132 · 07-08-2015, 02:02 PM

Ive got all my scan files to load into solidworks from the point cloud files. I can save them as whatever now. Did you take your point cloud then save it as a .obj file to begin editing?

asorg31 · 07-08-2015, 02:19 PM

Quote:

Originally Posted by Venom13132

Ive got all my scan files to load into solidworks from the point cloud files. I can save them as whatever now. Did you take your point cloud then save it as a .obj file to begin editing?

I did save it out as a .obj those files seem to play nicer in 3ds MAX. But because the scan saves all the individual polygons as Tris instead of easier to work with rectangles I decided to overlay a plane on top of the model and morph it to the shapes I needed for ease in modifying to fit the screen.

I'm nearly done recreating the original but now the hard work comes into play in the redesign. The good news is since I took the model down from 3 million polys to about 2500 right now. I added modifiers to smooth it out bringing the count to about 50,000 but still substantially better than before. I can also turn on/off that modifier to make it easier to change as needed.

07-06-2015, 07:37 PM	#76 (permalink)
FairladyZ40th Enthusiast Member Join Date: Jul 2015 Location: San Diego Posts: 483 Drives: 2010 370z 40th 6MT Rep Power: 61	Dissect a smartphone with the future Sent from my iPhone using Tapatalk asorg31 likes this.

07-06-2015, 07:38 PM	#77 (permalink)
asorg31 Enthusiast Member Join Date: May 2015 Location: Annapolis, MD Posts: 277 Drives: 2011 Nissan 370Z Rep Power: 10	Hey everyone I'm rendering a short video of where I'm at right now in the modeling process of the dash. I hope to have it finished and posted tonight so keep tuned and let me know what you think!! GZ3, Venom13132 and AntiVenom like this. __________________ ANTHONYSORG

07-07-2015, 11:07 AM	#78 (permalink)
asorg31 Enthusiast Member Join Date: May 2015 Location: Annapolis, MD Posts: 277 Drives: 2011 Nissan 370Z Rep Power: 10	There were some complications with the video last night, so I wasn't able to get it posted I will be all over it this evening though! Complications or no it's going up! Array and AntiVenom like this. __________________ ANTHONYSORG

07-07-2015, 01:35 PM	#79 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 11	got some more scanning done. Used a different lens set to make the files smaller. Hopefully I will be able to work with these files. They are close to 2gig each instead of 19gig! I still have some fill in work to get the gaps that I wasnt able to catch with the scanner, but I can do that at home. Knio, GaleForce, carlitos_370z and 4 others like this.

07-08-2015, 07:16 AM	#81 (permalink)
asorg31 Enthusiast Member Join Date: May 2015 Location: Annapolis, MD Posts: 277 Drives: 2011 Nissan 370Z Rep Power: 10	Alright guys here is a taste, this is a picture of the last frame of the video render that finished super late last night. I will be posting it to YouTube today then re-posting it here to the forum so keep a lookout! Venom13132 and AntiVenom like this. __________________ ANTHONYSORG

07-08-2015, 10:32 AM	#83 (permalink)
Trutactix Base Member Join Date: May 2014 Location: Florida Posts: 225 Drives: 09 370z MB 7AT Rep Power: 11	I bet a lot of people would rather have this than almost anything else on the market right now, it doesn't seem like there's an easy streamlined way to do it. With that said, please don't charge an arm and a leg to people if you decide to starting selling these Sent from my iPhone using Tapatalk Venom13132 and asorg31 like this.

07-08-2015, 10:36 AM	#84 (permalink)
asorg31 Enthusiast Member Join Date: May 2015 Location: Annapolis, MD Posts: 277 Drives: 2011 Nissan 370Z Rep Power: 10	Here is a very short video showing the dash part in full 360 degrees! GaleForce likes this. __________________ ANTHONYSORG

07-08-2015, 11:59 AM	#86 (permalink)
kidicenj Base Member Join Date: Jul 2013 Location: New Jersey Posts: 141 Drives: 12 Nissan 370z Rep Power: 12	Subd This is an awesome idea! asorg31 likes this. __________________ Shine Auto Amuse - Carbon Signal - FI CF CB Exhaust Non res - FI HFC - Stillen G3 - UPREV Tune - 20' Vossen CVT - Project Kic R40 - 255/35 285/30 - 15% tints

07-08-2015, 12:54 PM	#87 (permalink)
darkphantom Enthusiast Member Join Date: Apr 2015 Location: Houston, Texas Posts: 425 Drives: 13 Z34 PW M6 Rep Power: 243	OP - what's the source for the tablet here? Was it a custom touch-panel with a mini-itx running in the background? asorg31 likes this. __________________ '13 PW M6 \| Takeda \| ARK GRiP V2 \| H&R

07-08-2015, 02:02 PM	#89 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 11	Ive got all my scan files to load into solidworks from the point cloud files. I can save them as whatever now. Did you take your point cloud then save it as a .obj file to begin editing?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tesla D owns a Hellcat in the 1/4 mile...	DCNISMO	Other Vehicles	12	01-22-2015 02:37 AM
The new 691 HP Tesla D	watson853	Other Vehicles	3	10-10-2014 11:26 AM
Tesla gets armor plating....	DCNISMO	Other Vehicles	1	03-28-2014 11:55 AM
Tesla sedan!! Discuss	shabarivas	Other Vehicles	5	01-23-2010 11:49 AM