anyone interested in replacing door speakers but....

Wakeskater02

Any comments on the Polk DB 6501s as a component set? I have seen on here a few others use them with what seems like good results?

Until I save a little more money I am thinking about just upgrading the components myself....

However, thinking about it a little more it sounds as though I will need to switch all the wiring as I will be running crossovers with whatever component setup I run. I assume this will require a new harness etc....I was thinking about as someone said.....buying everything I want/need and having a local shop install it....I have done that to a certain degree before with my civic with good success.

I am looking for a nice double din touch head unit.....no navigation...

Here is one I was thinking about....
Pioneer AVHX4600BT 7-Inch USB Bluetooth Hi-Volt Pandora DVD Player https://www.amazon.com/dp/B00GN5K63M..._yiMwwbYBTYTBF

Any thoughts?

Sent from my iPhone using Tapatalk

YzGyz

A harness to connect the new head unit to the OEM harness is a good idea. They are cheap and makes installation easier. They also give a diagram for you to follow so you know which wire is the "remote" wire. As for new speaker wire, buy a roll of 12g or even 14 g wire. They will all be coming from. The amp and routed to the door speaker. The romex opens with a simple flip of the locking mechanism. You have to close the door a little to get the locking mechanism to open all the way. Use a sharp utility knife to cut the pin board for space to run the wire through.

YzGyz

__________________
http://www.the370z.com/members-370z-...gyzs-turn.html

YzGyz

RonRizz

And God knows, nobody wants "suck sound". Lol

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

YzGyz

Lol.. that was the only word that came to mind. Suck. Lol

YzGyz

__________________
http://www.the370z.com/members-370z-...gyzs-turn.html

YzGyz

Gibzki

Okay. I bought both speakers and spacers. I was planning to do this myself thinking its plug and play. Took door panels out and I think it is going to be more involved. First, the spacer is a bit tight, maybe I need to make the inner diameter a little bigger so it will fit snugly in the speaker. I also think I need to do more modification so I can secure the new speaker in the OEM mount.

Anyone has pictures of their install of this speakers? Any help or guide would really be appreciated.

markesc

Pulled the trigger on these!

and spacers can be found here:

https://www.zenclosures.com/Nissan-I...infinitisp.htm

*** make sure to note 370z when ordering ***

Questions:

Do I need any extra clips for the speaker terminals or can I use whatever the factory provided?

Dynamat: good idea/bad idea, and if so, how much/what kind for just the doors?

Do I need anything like foam parts, stuff like this:

https://www.cartoys.com/fast-rings-6...nhancement-kit

Are there any stupid fragile nissan factory clips that I'll need special tools for to avoid breaking?

froiwok

Are these the updated version? or better?

OPTI6HPRO4

500 Watts RMS / 1000 Watts Peak Power
Heavy duty stamped metal basket and Hardware
Mounting Depth: 2.95''
1'' Horn Loaded Compression Tweeter
Sensitivity: 94 dB (1W/1M)
1.5'' High Temperature CCAW Voice Coil
75 Oz Super Strontium Ferrite Magnet Structure
Sold as : 1
Frequency Response: 180Hz – 22KHz
4 Ohm Impedance
Overall Diameter: 6.85''
Cutout Diameter: 5.67''

RonRizz

Not an updated version, just a different model entirely. I can't say better or not, I have no experience with them.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

markesc

Just pulled the trigger on these!

and those Memphis audio 2.75" for the dash.

We'll see how good/bad this is with the STOCK headunit! This is the first time I've actually attempted not doing a separate amp just because I'm curious what cheap speakers with a lot of sound deadening can do first.

If you think this car has road noise, go drive an 02-07 wrx with an exhaust = tin can on wheels!

markesc

No idea, but they are not the same; These are a genuine co-axial, whereas the OP are simply midrange woofers. Could be better/worse if you have tweets in the doors AND the dash at the same time, I've heard arguments that messes up the soundstage, but I could be wrong and I've been out of this game for a long time!

markesc

After trying out the lanzars, I will say: if you don't have an amp, don't bother. Actually sounded worse than stock sadly. They look cool though! I may just have a bad head unit as it's always crackled in the right channel from new...

I'll go for a full set of Hertz and a nice JL audio 3 channel at this point... after I can tackle this seemingly impossible road noise issue. I'm still lost on how people on here just "live with" the road noise... maybe I'm getting old, but I just have higher expectations at this point. Just playing music louder isn't an option anymore.

axmea?

Why even bother with a sound system when you actually need to move on and replace your car to let someone else enjoy the Z. Buy a Lexus or a battery operated car.

__________________

sx moneypit

markesc

I love the car they can bury me in it! I just want a bit less road noise during those 2+ hour long trips where I often hit some bad sections of pavement. I'd rather hear the exhaust / music than the road noise drone!!

ChopsZ

That's why you should have upgraded the head unit first. When I replaced my stock head unit with the Pioneer, it made the stock speakers sound a hell of a lot better. It would also make those new speakers of yours sound a lot better.

__________________
She's For Sale! PERFORMANCE: Aero Workz | Akebono | BC Racing | EcuTek | HKS | MaxBore | Motordyne | Nismo | RJM | SPL | StopTech | Z1
AUDIO: Arc Audio | Bazooka | Helix | Pioneer | Stereo Integrity