|
Looks like your removing a door panel. Takes about 3 minutes. With practice, less than 1 minute. Pry up on window control panel at bottom edge, disconnect harness. Pry out
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
02-19-2015, 05:34 PM
|
#2 (permalink) |
|
A True Z Fanatic
Join Date: Aug 2011
Location: Pine grove, Pa
Posts: 2,136
Drives: 2 feet, 3 pedals
Rep Power: 6775   |
Looks like your removing a door panel. Takes about 3 minutes. With practice, less than 1 minute. Pry up on window control panel at bottom edge, disconnect harness. Pry out small panel in front of door handle, remove 10mm bolt. pry out small access panel below door handle near center of door, remove 2 10mm bolts. Grab edges of panel, and pull off gently. pop 2 door control cables out of brackets. Done. Find and fix rattle. Easy peasy
__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Annoying Rattling | PG370 | Intake/Exhaust | 32 | 06-23-2016 08:56 PM |
| Rattling Sound | buenor | Exterior & Interior | 10 | 04-10-2013 01:55 AM |
| Gone! Got rid of that annoying rubbing sound | DrEvil | Exterior & Interior | 2 | 02-11-2012 12:04 PM |
| high frequency sound/annoying as hell sound | Santent | Nissan 370Z General Discussions | 4 | 12-22-2009 09:59 AM |
26Likes
Threaded Mode
