Bose/nav adding subs, need help with wiring LC2i w/factory wiring

Funkdoobiest

Searched and couldn't find what I'm looking for. Basically I'm keeping stock system intact, but replacing factory sub with two 4-ohm SVC JL 10s. I got the amp and got the LC2i. How do I go about hooking this up and what existing wires am I using? I've hooked up all my own audio systems for the past 20 years but never used a line out converter and also hoped somebody could help me with the factory wiring, colors, etc. Reading about the low and high outputs lost me too. Thanks.

pfdaxe

Here are some links:

What to know about Bose

Converter to plug into line that runs to Bose Sub?

Just want more bass for Bose

__________________
Build Thread: http://www.the370z.com/members-370z-...xes-build.html

Funkdoobiest

Hells yeah thanks. I couldn't find one of these links.

Funkdoobiest

After reading it all I'm a bit confused, maybe you can confirm.

So cut and use the 2 sub signal input wires(+/-) going to stock sub. Use it on left input of LC2i. Split it after LC2i into 4 RCAs to amp for 2 subs. Use jumper inside LC2i? What color wires are the sub signal inputs? Will I also be using stock sub remote wire?

RonRizz

You pretty much got it nailed down. Those sub wire colors are in those posts somewhere.... I don't recall off the top of my head what they were, but I recall reading them there.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Navster

I'm not impressed with the Lci2to many issues with bass cutting out and one channel not working. So I ordered a audio control epicenter and a kicker kisloc. My question is can I take the right positive and left positive and connect them together on the kisloc and the same with the negatives and use it as a mono channel since I only have one outputfrom the original Bose sub wire?

RonRizz

that should work, or just pickup an rca splitter.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Jinxx

I used a rcaconverter on mine.....left everything stock ..I just taped the sub wires before the sub amp ......it sounds pretty good and I don't have any issues with it. I even left the factory subs where they were ...added a single 12 in a custom box.