Anyone experience a p1421 code after UPREV tune

Da370z · 09-16-2019, 07:44 AM

Basically title is my question, also related to the code it says its cold start idle control? the Z once in awhile idles high for a couple seconds then goes to normal at start up im assuming the code is causing the idle issues I tried searching and couldn't find an answer or solution on this, just wondering if anyone else has had this come up and if they have found a solution, thanks!

Z_ealot · 10-26-2019, 10:04 PM

I just had this same issue and my tuner had to disable simple timing in uprev in order for my Z to run correctly, I’m not sure what it is but my early production Z doesn’t seem to like any of the newer features of uprev

Z_ealot · 12-28-2019, 07:14 PM

I worked with uprev to correct the issue, as long as you have the very latest ROM the issue should be resolved now

09-16-2019, 07:44 AM	#1 (permalink)
Da370z Base Member Join Date: Sep 2014 Location: New Hampshire Posts: 73 Drives: 09 370z at Rep Power: 11	Anyone experience a p1421 code after UPREV tune Basically title is my question, also related to the code it says its cold start idle control? the Z once in awhile idles high for a couple seconds then goes to normal at start up im assuming the code is causing the idle issues I tried searching and couldn't find an answer or solution on this, just wondering if anyone else has had this come up and if they have found a solution, thanks! Last edited by Da370z; 09-16-2019 at 08:26 AM. Reason: explaining code

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New ECUTEK tune (Switched from my Uprev dyno tune) by SpecialtyZ	edconline	Tuning	40	03-29-2017 06:00 PM
My RS-Enthalpy Experience (Uprev)	PSerotinaZ	Tuning	22	10-06-2016 04:52 PM
Experience with UpRev in Austin	JohnnyBgood	Tuning	15	08-04-2016 05:58 PM
Any one experience trouble code P1089??	NK96950	Engine & Drivetrain	2	05-02-2013 05:27 AM
Uprev e-tune vs dyno tuning with uprev??	babbagandu	Tuning	6	05-07-2012 10:53 PM

10-26-2019, 10:04 PM	#2 (permalink)
Z_ealot A True Z Fanatic Join Date: Sep 2010 Location: Albuquerque, NM Posts: 2,045 Drives: 09 370Z Touring/Sprt Rep Power: 10091	I just had this same issue and my tuner had to disable simple timing in uprev in order for my Z to run correctly, I’m not sure what it is but my early production Z doesn’t seem to like any of the newer features of uprev

12-28-2019, 07:14 PM	#3 (permalink)
Z_ealot A True Z Fanatic Join Date: Sep 2010 Location: Albuquerque, NM Posts: 2,045 Drives: 09 370Z Touring/Sprt Rep Power: 10091	I worked with uprev to correct the issue, as long as you have the very latest ROM the issue should be resolved now