Q: To remove or not to remove top rubber cone from rear coilover? Please help.

t_n0d · 06-01-2018, 01:41 PM

I noticed a lot of members on here have removed theirs completely with the exception of the lower rubber isolator. To those who have, have you experienced any noticeable clanks and noises?

I still have my factory rubber cone sitting on top of my rear coilover to eliminate any noise, but I feel like if it is not needed, I should remove it as well. Any draw backs from leaving them out or in? Tell me your thoughts.

k67p67 · 06-01-2018, 03:38 PM

I've seen people cut the rubber cone to reduce its height. I haven't seen anyone remove it completely with stock springs. How would the spring stay in place? I'd imagine it would be noisy as hell. I've only seen it removed when replaced with aftermarket springs/coilovers that include a top hat.

Trips · 06-01-2018, 06:50 PM

Quote:

Originally Posted by k67p67

I've seen people cut the rubber cone to reduce its height. I haven't seen anyone remove it completely with stock springs. How would the spring stay in place? I'd imagine it would be noisy as hell. I've only seen it removed when replaced with aftermarket springs/coilovers that include a top hat.

This!

06-01-2018, 01:41 PM	#1 (permalink)
t_n0d Base Member Join Date: Feb 2018 Location: San Diego Posts: 20 Drives: 2013 Z34 SR Rep Power: 8	Q: To remove or not to remove top rubber cone from rear coilover? Please help. I noticed a lot of members on here have removed theirs completely with the exception of the lower rubber isolator. To those who have, have you experienced any noticeable clanks and noises? I still have my factory rubber cone sitting on top of my rear coilover to eliminate any noise, but I feel like if it is not needed, I should remove it as well. Any draw backs from leaving them out or in? Tell me your thoughts. Last edited by t_n0d; 06-01-2018 at 01:44 PM.

06-01-2018, 03:38 PM	#2 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 312 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	I've seen people cut the rubber cone to reduce its height. I haven't seen anyone remove it completely with stock springs. How would the spring stay in place? I'd imagine it would be noisy as hell. I've only seen it removed when replaced with aftermarket springs/coilovers that include a top hat. Trips likes this. __________________ SOLD2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Race Rubber Remover	2011 Nismo#91	Track / Autocross / Drifting / Dragstrip	4	01-13-2017 02:01 PM
Squeaking Rubber sound from Rear Tire	bdavis89	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	2	03-18-2014 06:25 AM
rear bumper remove? anyone know how	anhdat503	DIY Section (Do-It-Yourself)	2	09-22-2012 11:39 PM
how do you remove rear bumper?	ride or die	DIY Section (Do-It-Yourself)	6	05-24-2012 06:36 PM
Can the rear springs top rubber seats wear?	harp00n	Brakes & Suspension	1	09-27-2011 06:50 AM