AE Performance Oil Cooler Kit

Paul@AEperformance · 03-24-2010, 02:11 PM

Quote:

Originally Posted by B1nks

What's the lead time on these ? Also you say the heat up time for DD is still decent correct ? This will be my next mod and I'm really only looking at this one at this time.

No lead time, we try to keep several in stock. Heat up time is fine for DD. I DD with it and b/c of the design we keep pressure drop minimal so it allows the car to get up to proper temp properly.

Let me know if you have any other questions.

-Paul

Paul@AEperformance · 03-24-2010, 02:19 PM

Quote:

Originally Posted by wavehogger

So I was browsing the AE news and saw this update pasted below about the 370z still overheating (280 degrees) at the Redline Attack with reference to having an oil cooler? Can you guys at AE explain what happened there.

I'm still in the research phase of deciding which one to get and I really want to make the right choice here. Your's is pricey but if it can keep it cool on a 95 degree day at the track, then I'll spend the extra $$.

I am in New England and I will be driving my car in some cooler and wider ranging temps (40's - 90's) and want the most cooling as possible without worrying about reaching a decent temp. I haven't found anyone reviewing it yet online who has actually installed it. And your website still doesn't have it listed in the products section nor does it have any installation instructions/info just so I can see what's what. Thanks in advance!

"Paul Dentice in the AE Performance 370z takes 1st at Spring Mountain

Recap by Paul D.
Spring Mountain was a first for the AE crew and with 18 turns it was anything but easy to figure out the fast way through the course, but fortuneately NV locals including Mike and the Double Down crew were super cool in lending a helping hand.

On track the car felt rock solid. The AE preped JIC dampers allowed for late apexing and a planted rear end through the high speed sections even with the old tires we were on. (3 track days).

We switched to Ferodo RS3000 pads for our AP brakes that ended up being a bit too aggressive in the rear but a quick swap to a milder Mintex pad in the rear settled the car much more and was easier to keep stright under hard braking.

Heat was a major issue for everyone. With the Oil Cooler upgrade we were still only able to complete 1 hot lap before the oil temps hit 280deg and the car wouldn’t rev past 5k rpm’s.

After all was said and done, We were all really impressed with the Z. With viturally no power mods out-side of a Stillen intake and Mine’s Flash we were solely relying on the Z’s chassie to pull through for us and it did! Rich placed 5th in Modified RWD Class in the GT2, GTR (DNF),and I grabbed top honors in SS RWD class with the Z, and was able to make the 4.5hr drive back to the OC without a hick-up."

Good eye!

This was all before we developed our own kit and were running other manufactures kits. Spring Mountain was the 2nd cooler kit we tired from another company that only allowed 1 hot-lap. We tired one more kit on the market after that and then deiced to just build our own kit.

We have had nothing but 100% satisfaction from all of our customers that run out kit.

SoCal 370Z · 03-24-2010, 02:38 PM

You'd probably get more takers if you were to show potential buyers the kit installed with the nose off (showing how it is arranged) and with the nose on to demonstrate what it looks like through the grill opening.

I do like the fact that it is along similar lines as ARC's and Central 20's.

ZForce · 03-25-2010, 11:11 PM

^ In for some pics.

ChrisSlicks · 04-08-2010, 06:02 PM

Where are the lines assembled and what size are they?

djohnson1967 · 04-09-2010, 02:48 PM

Hello: Do you have installation instructions that you can post or e-mail to me? What about the pricing? Can I still get the member deal of $995? I you sent at least 4 kits already. Let me know what you can do on the price. Thanks

wavehogger · 04-09-2010, 04:39 PM

I am on the verge of purchasing one myself and would like to see the installation instructions and some pics. And will this fit ok with the Stillen Gen 3 intakes? Thanks

Paul@AEperformance · 04-13-2010, 09:10 PM

Hi guys,

Just wanted to get back to everyone on some questions that came up.

Quote:

Originally Posted by ChrisSlicks

Where are the lines assembled and what size are they?

All lines are professionally assembled by Earls, Pressure tested and guaranteed! Size is -8

Quote:

Hello: Do you have installation instructions that you can post or e-mail to me? What about the pricing? Can I still get the member deal of $995?

Kits come with install instructions. And yes as a THE370Z member you can get the member pricing!

Quote:

I am on the verge of purchasing one myself and would like to see the installation instructions and some pics. And will this fit ok with the Stillen Gen 3 intakes? Thanks

You won't be dissapointed! I will post some install pic's for you and as I mentioned the kits all come with instructions.
This kit will work w/ Stillen Gen 3 intakes No Problem. Same intake we run on our car

Paul@AEperformance · 04-13-2010, 09:11 PM

Thanks, Double Down Mike for your order.

Your kit is on it's way!

ChrisSlicks · 04-13-2010, 10:32 PM

Thanks for the info Paul.

I have to say I'm a little surprised by the -8 line size given the high flow rate though the oil system in this car, but I'm sure you've done your homework.

Is there bypass protection in the adapter plate?

Paul@AEperformance · 04-19-2010, 07:19 PM

Install Pic's, From Mike Bonanni

Full Review here: M.Bonanni's 370Z Project "Born Again"

37Z · 04-22-2010, 08:16 PM

1)What is (if any) oil pressure drop? Do you have any oil pressure readings when the oil temps is lower than 185 degrees and at approx. 190-220 degrees,and more than 220 degrees?

2)Do you have to relocate the power steering cooler?

3) Can you add remote oil fileter (i.e. like Amsoil by-pass oil filter or)?

4) Can you add a oil pressure sender and oil pressure gauge? If so, were would this sender by located?

5) Do the oil cooler impede the radiator's flow/cooling? Any water temps before/after the oil cooler's install would be helpful in making up my mind on its purchase.

simons · 05-18-2010, 07:48 PM

How do you go about ordering one? Tried logging onto your online store and it's under construction or something. Also, is it still the same price as when you first released it?

MUST · 05-22-2010, 02:45 AM

Got mine installed at AE today.

Great job on installation, very thorough and precise.

before install, my oil temps ranged from 230-250 (mild driving/traffic) and after install i averaged about 200!

To Paul, Casey and the guys at AE Performance...thanks for the awesome install job, really made me feel like this oil cooler kit was custom made for my Z, in many ways i guess it was!

AK370Z · 06-26-2010, 06:57 PM

pictures are not visible on original post

. Paul?

03-24-2010, 02:38 PM	#18 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 33	You'd probably get more takers if you were to show potential buyers the kit installed with the nose off (showing how it is arranged) and with the nose on to demonstrate what it looks like through the grill opening. I do like the fact that it is along similar lines as ARC's and Central 20's. __________________ ( Click to show/hide ) Why I NEVER say NO to the Panda Lou Fusz!!!

04-08-2010, 06:02 PM	#20 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Where are the lines assembled and what size are they? __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

04-13-2010, 09:11 PM	#24 (permalink)
Paul@AEperformance The370Z.com Sponsor Join Date: Aug 2009 Location: At the Track Posts: 194 Drives: All sorts of Fast! Rep Power: 16	Thanks, Double Down Mike for your order. Your kit is on it's way! __________________ http://i10.photobucket.com/albums/a1...Ejdmbanner.gif

04-13-2010, 10:32 PM	#25 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Thanks for the info Paul. I have to say I'm a little surprised by the -8 line size given the high flow rate though the oil system in this car, but I'm sure you've done your homework. Is there bypass protection in the adapter plate? __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

04-19-2010, 07:19 PM	#26 (permalink)
Paul@AEperformance The370Z.com Sponsor Join Date: Aug 2009 Location: At the Track Posts: 194 Drives: All sorts of Fast! Rep Power: 16	Install Pic's, From Mike Bonanni Full Review here: M.Bonanni's 370Z Project "Born Again" __________________ http://i10.photobucket.com/albums/a1...Ejdmbanner.gif

03-25-2010, 11:11 PM	#19 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	^ In for some pics.

04-09-2010, 02:48 PM	#21 (permalink)
djohnson1967 Base Member Join Date: Apr 2010 Location: Tucson, AZ Posts: 21 Drives: 2010 370z 40th Rep Power: 15	Hello: Do you have installation instructions that you can post or e-mail to me? What about the pricing? Can I still get the member deal of $995? I you sent at least 4 kits already. Let me know what you can do on the price. Thanks

04-09-2010, 04:39 PM	#22 (permalink)
wavehogger Base Member Join Date: Jun 2009 Location: Central Mass Age: 54 Posts: 31 Drives: 09 370Z MB/P 6MT T/S Rep Power: 16	I am on the verge of purchasing one myself and would like to see the installation instructions and some pics. And will this fit ok with the Stillen Gen 3 intakes? Thanks

04-22-2010, 08:16 PM	#27 (permalink)
37Z Enthusiast Member Join Date: Jun 2009 Location: Florida Posts: 476 Drives: 370Z MB 6M -sold Rep Power: 263	370z oil cooler specs 1)What is (if any) oil pressure drop? Do you have any oil pressure readings when the oil temps is lower than 185 degrees and at approx. 190-220 degrees,and more than 220 degrees? 2)Do you have to relocate the power steering cooler? 3) Can you add remote oil fileter (i.e. like Amsoil by-pass oil filter or)? 4) Can you add a oil pressure sender and oil pressure gauge? If so, were would this sender by located? 5) Do the oil cooler impede the radiator's flow/cooling? Any water temps before/after the oil cooler's install would be helpful in making up my mind on its purchase. Last edited by 37Z; 05-04-2010 at 07:31 PM. Reason: typo's

05-18-2010, 07:48 PM	#28 (permalink)
simons Base Member Join Date: May 2010 Location: York, SC Posts: 30 Drives: 09 Nissan 370Z Nismo Rep Power: 15	How do you go about ordering one? Tried logging onto your online store and it's under construction or something. Also, is it still the same price as when you first released it?

05-22-2010, 02:45 AM	#29 (permalink)
MUST Track Member Join Date: Jan 2009 Location: s.cal Posts: 599 Drives: her crazy Rep Power: 17	Got mine installed at AE today. Great job on installation, very thorough and precise. before install, my oil temps ranged from 230-250 (mild driving/traffic) and after install i averaged about 200! To Paul, Casey and the guys at AE Performance...thanks for the awesome install job, really made me feel like this oil cooler kit was custom made for my Z, in many ways i guess it was! __________________ • SSR • HKS • PMU • AKRAPOVIC • AE • HOTCHIKIS • H&R • HANKOOK • BROADWAY • RIP: "Marshmallow" August 30, 2009 — November 30, 2015

06-26-2010, 06:57 PM	#30 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	pictures are not visible on original post . Paul? __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 03:27 PM
WINTER EXHAUST MEGA-SALE! MXP PERFORMANCE l HKS l GREDDY l STILLEN l ARK PERFORMANCE	DriveLineEric	Exhaust/Intake	88	06-09-2011 12:54 PM
AE Performance Oil Cooler Kit! Now Avaiable!!	Paul@AEperformance	Drivetrain/Engine	38	01-16-2011 02:34 AM
HKS Oil Cooler	370Ztune	Engine & Drivetrain	0	07-10-2009 02:19 PM
Oil cooler	Zeto	STILLEN	6	04-20-2009 08:08 PM

*AE Performance Oil Cooler Kit*

AE Performance Oil Cooler Kit