Quote:
Originally Posted by Jordo!
How difficult was it to cut the bumper -- what did you use?
This would be a really nice mod for anyone using the OEM airboxes too.
Oh, can you confirm that these are the ones for the 350 and not the 370.
BTW, nice racing stripe
|
cutting the front bumper wasnt a problem at all - but to answer your last question first, yes those are the 350Z ducts as tmk there are no ducts for the 370Z expect the very expensive varis units. The ones I used came from ebay for a very affordable price and as you can see they fit the 370Z almost perfectly !
along with the ducts you get a stencil - unfortunately only for the drive side but you can simply use it for the passenger side by putting it on in reverse.
I used a simple paper cutter to make the outlines on the bumper and then used a bigger cutter to get through the bumper - its not very thick so no problem !
later on I discovered that the stencil is not very accurate in terms of size so I had to modify the opening with the tool you see on the second picture but as a starting point the stencil is not too bad.
and yes, this mod would be very nice even for stock air boxes !
Chris