This bundle offer includes one set of RLL-87-2 two-pc, two-stage incline Race Ramps, a pair of Trailer Ramp Adapters, and a pair of Buyers Products WC1467A reinforced rubber wheel chocks (not shown). The RLL-87-2 Race Ramps have an initial incline of 6.8 degrees. Our regular prices are $415 for the RLL-87-2 ramps, $95 for the Trailer Ramp Adapters, and $27 for the pair of Wheel Chocks. The wheel chocks are included at no charge with this offer.
The first photo shows an RLL-87-2 ramp in the center with a RLL-72-2 ramp on the left and a standard RR-XT-2 ramp on the right. The second photo shows the lowered 2" stop on the platform of the RLL-87-2 as compared to the standard 3" high stop on the RR-XT-2 platform.
The third photo shows a small section of a 2x4 standing on edge 24" from the leading edge of the RLL-87-2 ramp. You can use a section of 2x4 to as a simple gauge to determine if the ramps will work with your car.
The last two photos show the Trailer Ramp Adapter. This adapter converts the incline section of the RLL-87-2 ramps into a Trailer Ramp that is 68" long 8.5" high with a 2" deep step for the trailer ramps or door. The step on the Trailer Ramp Adapters is reinforced.
If you are in the market for a set of service ramps and a set of trailer ramps, this combination is less expensive and requires less storage space than a one set of dedicated service ramps and another set of dedicated trailer ramps.
Brute Industries, Inc. custom makes the two-stage incline ramps and trailer ramp adapters for Reverse Logic Limited. More photos, drawings, and a video clip are available at this link:
http://www.reverselogic.us/ReverseLo...ace_Ramps.html