Hello everyone!
I ordered my new 12k LED Cool Blue Light Bulbs (#194) last weekend and just received them in the mail today! I installed them in the front, and they were really easy to do! Literally took me 10 minutes! It is by far one of the most inexpensive, yet most enjoyable mods I have done recently!
I found the post from Batman_4 to be the most helpful installing the bulbs:
help :replacing bulbs on headlight assembly
It read:
Took me 4-5mins per side. to make this as easy as possible 1st for example if you are going to tackle the driver side 1st turn the wheel all the way to the right so that you have more working space. then get a flat head and pop that little clip that holds the inner fender (black plastic, there is only one). then start to "pop"/pull out the inner fender out which will give way to the lower part of the headlight....look for a long looking grey cylindrical tube around the area where the bulb is (just look and its pretty obvious which one it is)....twist counter-clockwise....pull out and walla! then close it up...turn wheel in opposite direction and tackle the other side. i can take some pics later on this week if needed because i know it may not make sense in just words.
So, here are the pictures I took to help show the differences:
Before:
After:
Comparison:
Different Angle:
Finished:
