Nissan 370Z Forum - View Single Post - Forged Performance: 2011 STi Sedan MONSTER Build **check back often**

Tray@Forged · 03-03-2011, 03:05 PM

Got a few more items in the mail today that I'd like to share. Tomei sent us a few goodies that are going to be perfect for our Engine Build. We ordered the Tomei Timing belt, Belt guide, Baffle stiffner, and 270/270 Camshafts. The quality of each of the Tomei parts are second to none. We look forward to installing these items, and putting the camshafts to test.

The Tomei Kevlar Timing belt, and Belt guide. The timing belt is super tough and is claimed to be 4x the strength of OEM without sacrificing durability. We paired the timing belt with Tomei's belt guide. The Belt guide is a straight cut of aluminum with an extended length to securely apply more tension to the timing belt. This product comes in handy when immediate changes in torque are experienced by the engine, eliminating belt whip.

Tomei's highly experienced engineers developed an engine baffle stiffener to help prevent bearing failure, and help regulate the oil supply. During the R&D Tomei found one of the main causes of engine problems on the EJ20/25 are the bearings. The majority of the cases were caused by lack of motor oil in the oil pan (sump) and passages. They also found that the lack of rigidity in the crank case is also another problem facing this engine design. Under extensive research, Tomei created the baffle stiffener which helps strengthen the left and right side of the crankcase to help provide the added support with its dual structural design. The rubber baffle design greatly aids the regulation of the oil supply. This gives added control to reduce blowby for EJ20/25 owners who use their cars for high performance driving.

The most exciting parts that arrived were the Tomei PROCAMS. We decided to go with Tomei's PROCAM 270 Intake, & 270 Exhaust. We felt this was the best bet for our large turbo application. The specs on the camshafts are quite impressive. The Intake side has 11.0mm lift, and the exhaust side has a lift of 10.8mm. With that lift we know it will make an significant improvement to our 2011 STi build. Not only do we hope to achieve more power with the camshafts but improve the powerband. We look forward to performing a dyno test in the weeks to come.

Thanks for looking!

Tray

03-03-2011, 03:05 PM	#71 (permalink)
Tray@Forged The370Z.com Sponsor Join Date: Jan 2010 Location: Johns Creek, GA Posts: 540 Drives: 05 Infiniti FX35, Rep Power: 0	Got a few more items in the mail today that I'd like to share. Tomei sent us a few goodies that are going to be perfect for our Engine Build. We ordered the Tomei Timing belt, Belt guide, Baffle stiffner, and 270/270 Camshafts. The quality of each of the Tomei parts are second to none. We look forward to installing these items, and putting the camshafts to test. The Tomei Kevlar Timing belt, and Belt guide. The timing belt is super tough and is claimed to be 4x the strength of OEM without sacrificing durability. We paired the timing belt with Tomei's belt guide. The Belt guide is a straight cut of aluminum with an extended length to securely apply more tension to the timing belt. This product comes in handy when immediate changes in torque are experienced by the engine, eliminating belt whip. Tomei's highly experienced engineers developed an engine baffle stiffener to help prevent bearing failure, and help regulate the oil supply. During the R&D Tomei found one of the main causes of engine problems on the EJ20/25 are the bearings. The majority of the cases were caused by lack of motor oil in the oil pan (sump) and passages. They also found that the lack of rigidity in the crank case is also another problem facing this engine design. Under extensive research, Tomei created the baffle stiffener which helps strengthen the left and right side of the crankcase to help provide the added support with its dual structural design. The rubber baffle design greatly aids the regulation of the oil supply. This gives added control to reduce blowby for EJ20/25 owners who use their cars for high performance driving. The most exciting parts that arrived were the Tomei PROCAMS. We decided to go with Tomei's PROCAM 270 Intake, & 270 Exhaust. We felt this was the best bet for our large turbo application. The specs on the camshafts are quite impressive. The Intake side has 11.0mm lift, and the exhaust side has a lift of 10.8mm. With that lift we know it will make an significant improvement to our 2011 STi build. Not only do we hope to achieve more power with the camshafts but improve the powerband. We look forward to performing a dyno test in the weeks to come. Thanks for looking! Tray