Originally Posted by JJ-NISMO

There are a lot of posts... google vinyl install.

You need to do a few things:

1) Clean surface
2) Spray surface with soapy water
3) Lay vinyl over surface and peel a portion of the adhesive backing off
4) Spray adhevise side of vinyl with soapy water
5) Lay vinyl on surface and use foam wrapped tool to smooth it out
6) continue peeling backing off and repeating steps 4 and 5 until the sheet is fully down
7) Work on smoothing out vinyl with tool and tucking the ends under the weather stripping on the sides and the windshields on the front and back
8) Use a heat gun if necessary to smooth out any wrinkles
9) cut excess on sides and front to back
10) continue to smooth with tool and make sure all excess liquid under the vinyl is worked out
11) let dry