JJ-NISMO

Hey Shamu, check out the quote below for info... I pulled this from CFZs post and he quoted another user. My suspension is completely stock except for the Swifts and from what I can tell so far, there are not any issues at this point. Everything feels better than before.


Originally Posted by s30z View Post
Just called Eibach to find out what the spring rates are for the Nismo. And I'm not going to lie. The car looks good but Im going to pass on this.

The 370z is already well balanced out of the box I do not need it to induce understeer.
The stock Nismo rates are
F- 8.6 R- 9.3

The Eibach rates for the normal Z
F- 8.6 F- 9.5

The Eibach Nismo Rates are
F- 9.8kg R- 9.5 which is a 14% increase in the front and 2% increase in the rear.

I dont see why they would set this car up like this. They completely switched up the spring rate bias from front to rear. And a front heavy spring like that will not only induce understeer, but the valving range of the shock is also slightly altered, the rear rates being extremely close to stock, and then the front rates are more sprung. Even though it is within the valving range of the shocks, if Nismo really did a good job fine tuning their shocks then these springs will throw off the original feel Nismo was going for.

Just to show you the rest of the spring rates
Tein s-tech -
F- 8.5 R- 9.4

Tanabe NF
F- 5.9 R- 6.8

Tanabe GF
F- 8.8 R- 9.1

Swift Spec R
F- 10 R-10.5

So just about every spring manufacturer out there pretty much decreases the rates of our nismo which pretty much completely dtunes our upgraded shocks.

Eibach although stiffer, went in a weird direction with their spring rates, and will alter the handling characteristics of the Z

Swift is the only one by numbers is a performance option for our Nismo shocks.

these are all converted to kg/mm if you guys want me to post it up in pounds per inch I can do that later.