Quote:
Originally Posted by definitionxmk
Nice to see another yellow Z being modded... Lookin' great! What's next?
|
Black out the headlights and maybe a roof overlay then hopefully start saving for a supercharger.
Quote:
Originally Posted by Junior370z
Oh snap! Another chicane yellow brother hehe! Looking good man! H&R spring drop the Z pretty low. How's the ride?
|
Actually i was wrong, the car was lowered when i bought it and i spaced it when i wrote that. It is lowered on Eibach springs. they are not very low at all and the ride is very nice.
Quote:
Originally Posted by genki370z
i love how your ride came out, whats so funny is that varrstoen says that running a +22 with a 5mm spacer in the front will not clear BBK....obviously it looks like you dont have a problem with that lol  |
It all depends on the tolerances of the car and the wheel. cars are built and there are a certain level of tolerance allowed and im sure it's the same with the wheel so it's a hit and miss thing. it did fit but i probably could barley fit a piece of paper between the wheel and the caliper and that kinda scares me so i ground down some of the caliper. I didnt really want to do anything to the wheel for integrity reasons.
If anything i would get a 6 or 7mm spacer and everything should be just fine, a close fit still im sure but you shouldnt have to modify anything. well you would have to change the wheel studs with anything more then a 5mm spacer. im kinda on the fence about using the longer studs with the 5mm spacer because of how much thread im getting on the lug nut is borderline.