View Single Post
Old 01-25-2011, 10:52 PM   #9 (permalink)
xsnapshot
Base Member
 
Join Date: Jan 2011
Location: Nebraska
Posts: 21
Drives: 2004 WRX
Rep Power: 15
xsnapshot is on a distinguished road
Default

Quote:
Originally Posted by Megan370z View Post
This is what I can do with my Uprev Tuner kit
The VVEL is not supported right now and might not for a while !!
Right now We do have the Throttle mapping but no one can really tell what those numbers represent in the mapping. So good luck if you want to touch it !



5 Maps
Cylinder Trim
Fuel Target Settings
Injector Latency
K-Fuel Multiplier
Ignition Timing *High / Low Detonation / Cold*
Speed Limit Throttle Cut
Rev Limiter *Fuel Cut*
Rev Limiter (Fuel Restore)
Throttle Cut Rev Limiter
Calculated Load
Cranking
Cranking Enrichment
Idle Targets
Mass Air Flow Sensor
DTC
Adjust Injector Latency
MAF Type
Electronic Throttle
Torque Management (auto transmission)
Fuel Target
Fuel Compensation *Cold / Main*

VVEL tuning NOT Available
Perfect! This is exactly what I was trying to find. Throttle mapping sounds like it would be similar to this table in the Subaru ECU


*note the "3D" graph below does not correspond to the above table, this is just an example. *


Where basically the computer asks for a value to assign for the opening angle of the throttle plate, vs the pedal position.

Last edited by xsnapshot; 01-25-2011 at 10:53 PM. Reason: forgot to explain
xsnapshot is offline   Reply With Quote