The output from the Bose HU is a balanced low voltage signal going into the stock Bose amps with 4 channels and one more additional wire that i believe removes engine noise and other interference. I ended up using the High Level speaker outputs from the Bose AMP to connect and Sum with the RE-Q.
I tried to make my own RCA cable with the Low Voltage signal but since it was a balanced signal i don't think I could get it working correctly because i had too much noise.
You can make your own harness to go from the Bose AMP Out to your summing device but you'll also need to make one more additional harness to go from your Speakers if you want to avoid cutting completly.
And as far as anyone making anything I don't think they do.
__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P
|