NEW from Race Ramps - Two-Piece, Two-Stage Incline Race Ramps
For those familiar with the Race Ramps product line, this new design is essentially an RR-XT-2 two-piece 67" Race Ramp with an integrated RR-EX-14 XTender.
The overall length of the ramps is 87". The platform section is 30" long and the incline section is 63" long including the 6" interlock. The ramps are 10" high and 14" wide just like the standard RR-XT-2 product. The approach angle is just 6.8 degrees compared to 10.7 degrees on the standard RR-XT-2. The stop at the top of the ramp has been reduced from 3" to 2" high.
If you have 3.5" of ground clearance 24" in front of your front tire foot print, then the RLL-87-2 ramps will fit under your car. You need about 5" of clearance at 24" to use the RR-XT-2 67" ramps.
I expect to be shipping the RLL-87-2 ramps within the next two weeks. Pricing info should be available in a few days. I will post specs for the 8" high version of the ramps later this week.
Last edited by Fred@ReverseLogic; 01-21-2011 at 09:29 PM.
|