Originally Posted by jadeb0x

thanks for the info and diagrams, it made my install a lot easier. i installed mine as a 4th brake light with parking light feature, no flash. i did use male/female connectors so that if i wanted to add a flasher later it wouldn't be so hard to do.

anyhow, my extra tip... i used the tan 7443 harness end from the original Lexus IS300/Altezza brake light to obtain the low/high intensity (sourced from a junkyard). i had to shave the circumference of the harness down, and took out 2 of the locking prongs. it eventually sat snug and even locked into place within the light.

for wiring, i used the diagram that was previously provided here and of course i skipped over the flasher. hook up as follows:

nissan red wire - lexus green wire
nissan green wire - lexus green/white wire
nissan black wire - lexus white/black wire

as for the bolts, i didn't have any problem removing mine, just a little TLC with the removal. good luck with your installs and thanks again!