Nissan 370Z Forum - View Single Post

CBRich · 06-04-2009, 11:02 PM

Sorry, half asleep. Thanks for the help.

I also did some additional reading on astable mode. As far as I can tell going with a 1K resistor on the R1 side would result in a nice 50/50 on off time. From there I can just choose R2 and C for controlling the actual time back and forth. I don't have any problems with relays so it should be easy to get the output to simply trigger one to illuminate the rear light. I'm slowly learning and may try some simple designs to get familiar with it.

Thanks again.

06-04-2009, 11:02 PM	#66 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Sorry, half asleep. Thanks for the help. I also did some additional reading on astable mode. As far as I can tell going with a 1K resistor on the R1 side would result in a nice 50/50 on off time. From there I can just choose R2 and C for controlling the actual time back and forth. I don't have any problems with relays so it should be easy to get the output to simply trigger one to illuminate the rear light. I'm slowly learning and may try some simple designs to get familiar with it. Thanks again. Last edited by CBRich; 06-04-2009 at 11:06 PM.