Nissan 370Z Forum - View Single Post

NotmyGTR · 06-03-2009, 10:13 PM

The mounting foot for the four corners only utilize a flat washer, so thats what I changed to lock washers. Also, there is a bright silver bar that runs from side to side towards the front of the seat. Kinda weak, and its mounted on tabs to the rail itself. I measured that distance from tab to tab and replaced that with flatbar. Pain in the azz to drill the holes........I used stainless.....but the click is a thing of the past. Hope that explains it good enough.

06-03-2009, 10:13 PM	#3 (permalink)
NotmyGTR Base Member Join Date: May 2009 Location: TX Posts: 177 Drives: 09 370Z/Pearl 6speed Rep Power: 16	Mounting foot The mounting foot for the four corners only utilize a flat washer, so thats what I changed to lock washers. Also, there is a bright silver bar that runs from side to side towards the front of the seat. Kinda weak, and its mounted on tabs to the rail itself. I measured that distance from tab to tab and replaced that with flatbar. Pain in the azz to drill the holes........I used stainless.....but the click is a thing of the past. Hope that explains it good enough. __________________ 1996 Skyline GT-R LM fully tuned by Mines/2006 Nissan Titan 5.6 SE Texas Edition/2009 370 Base w Sport Pkg