View Single Post
Old 11-26-2010, 08:38 PM   #104 (permalink)
ProfessorDave
A True Z Fanatic
 
ProfessorDave's Avatar
 
Join Date: Jul 2010
Location: Scranton, PA
Posts: 1,580
Drives: In the fairway
Rep Power: 19
ProfessorDave has much to be proud ofProfessorDave has much to be proud ofProfessorDave has much to be proud ofProfessorDave has much to be proud ofProfessorDave has much to be proud ofProfessorDave has much to be proud ofProfessorDave has much to be proud ofProfessorDave has much to be proud ofProfessorDave has much to be proud of
Default

Quote:
Originally Posted by CBRich View Post
If you take out the carpet and foam and all right behind the cross bar you can shoot a hanger straight down the armrest.
Great, thanks!

Update: I figured I would remove the old dummy lens in anticipation of receiving the new one. Holy crap! You guys weren't kidding about those bolts! There was no removing them with a ratchet. I ended up using a combination to techniques I picked up on this (and the other) foglight install thread. I used a dremmel to get one nut off, and ended up melting the plastic on the other, pulling the bolt right through (I'm sure I can cover the hole with a large washer). All this took me over an hour. Ridiculous!

I have the factory harness/plug on my 2009. Not sure what to do with that...

Anyway, I put the old lens back in (put a long sheetroack screw in throught the bottom hole for the black metal backing plate) so it doesn't look stupid.

The tips on this thread have been very, very helpful!
__________________

Rain, snow, sleet, hail: 2009 Mazda 3 sGT HB
Everything else: 2009 370z, PW Touring 6MT

Last edited by ProfessorDave; 11-28-2010 at 01:16 PM.
ProfessorDave is offline   Reply With Quote