Ahh, ok that makes sense. On mine, yes the clips are on the right hand side of the light units also, so cables would be closer to the clip for feeding through. I thought it was a bit close to the clip to be able to get the bulb in and out if required. Also didnt realise that the left hand side was closer to the centre of the car. I can easily swap it over to that side if needs be though, no biggie.
With the license plate holes, I didnt take my plate off. I fed a bit of 2 core wire through the grommit and down to the floor, then made a "hook" out of the end and hooked it in the hole for the bulb holder. Taped the cam wire to that and pulled it all back through
I'll have a play with the numbers, but may just move it over to the other side of the release button if the numbers are hard to work out. Keeps it easier to work with if we all have the cam in the same place I guess.