I wasn't changing the start button but I just wanted to remove the whole dash part to give myself more room. I also routed the wires from the screen behind the radio panel so I removed that as well but didn't disconnect any connectors there.
Also where did you guys put the little power control module for the camera? I hid mine in the shifter area.
I think I know what happened with the airbag light. I had disconnected the passenger airbag off light and accidentally turned the car power on while fiddling with the start button. I turned it off right away but I'm guessing that caused some error in the SRS system. I'm going to try to reset the error according to the service manual and see what happens. I never touched any other wires besides those.
Perhaps a recommendation to disconnect the battery before removing the dash pieces would be good lol unless that's common sense and I'm just a newb.
The camera works great though! I just need to test it out at night but I'd expect visibility to be good too.
Edit: Resetting the SRS error worked. Light's not staying on anymore and the camera works perfect!
__________________
SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav
F.I. CBE CF w/ 12" Res | V1 | SecondSkin | Stillen G3 | EVO-R CF B-Pillars | Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R | Swift Spec-R Springs
Last edited by tsolin01; 11-21-2010 at 04:01 PM.
|