View Single Post
Old 11-18-2010, 01:54 PM   #1 (permalink)
Paul_S
Enthusiast Member
 
Paul_S's Avatar
 
Join Date: Sep 2009
Location: England
Posts: 258
Drives: UK Yellow 370Z
Rep Power: 16
Paul_S is on a distinguished road
Default DIY: Fitting an auto dimming mirror

An auto dimming mirror isn't an option for the 370Z in the UK (I'm not sure about elsewhere) and I recently noticed how cheaply second they were being sold on ebay so a plan was hatched...

This guide can be adapted for use with the 350Z or any other car for that matter. The great thing about doing this on the 370Z is that there is already the perfect power supply located in the right place to make things easier.

You will need
* An auto dimming mirror - I used a BMW E36 mirror that I bought on ebay for less than £20. This turned out to be perfect both in dimensions but also in fitting
* A long self-tapping screw
* A drill and drill bit to suite the screw
* A hacksaw
* Some 2-core power cable (I used some black flex from an lead I had lying around) - OR 3-core if you wish to wire in the reversing signal
* A pair of snips and / or wire strippers
* Some electric connecting blocks / scotch locks / soldering iron - your preference
* Some insulating tape or heat-shrink insulation
* A screwdriver
* A plastic tool to part the BMW mirror and remove your 370Z plastics - I used a old credit card

Before I start here are the 2 mirrors for comparison:

__________________
In the UK? Check out nissansportz.com - 350Z, GT-R, 370Z and more...


2004 Sunset 350Z to 2009 Limited Edition Ultimate Yellow 370Z
Paul_S is offline   Reply With Quote