Nissan 370Z Forum - View Single Post

vortrex · 11-14-2010, 05:15 PM

I put 9x19 and 9x11 wheels with 255/35 and 295/30 hankooks with eibach springs and now have too much understeer. the alignment specs post spring install show -1.3deg and -1.4deg camber in the front.

can I get more negative camber out of the front with the stock bits? if so, what is suggested to relieve the understeer based off the tire sizes I am running? also, at what point do I start getting tire wear because of too much negative camber?

would sway bars help my situation at all?

thanks.

11-14-2010, 05:15 PM	#1 (permalink)
vortrex Base Member Join Date: Nov 2009 Location: SF, CA Posts: 199 Drives: '09 370z 6spd Rep Power: 16	too much understeer now! I put 9x19 and 9x11 wheels with 255/35 and 295/30 hankooks with eibach springs and now have too much understeer. the alignment specs post spring install show -1.3deg and -1.4deg camber in the front. can I get more negative camber out of the front with the stock bits? if so, what is suggested to relieve the understeer based off the tire sizes I am running? also, at what point do I start getting tire wear because of too much negative camber? would sway bars help my situation at all? thanks.