Quote:
Originally Posted by Gmendez
I think I need to clarify....
1. I have already done the hack (moved the mute wire over one pin and connected it to the paking wire & ground on the harness).
2. I know where to get the reverse wire (kick panel - thanks for the post/pics).
3. Pin 18 on your diagram (separate post) lines up with the Orange/Black wire (see my first pic on this thread), but none of the other wires match. This is where I am confused. Did all of your wires match your pinout diagram?
|
You will not connect the speed wire to the Scosche harness. You connect it to the pink wire marked vehicle speed sensor on the Pioneer harness. Esentially I extended the pink wire to reach the Nissan harness and tapped it. If the yellow speed wire is on the same pin as your orange wire then i guess u can use it. I dont remeber if I checked that.
To eliminate confusion find some wires you know of for sure like power, front speakers ect to make sure you are looking at it right. Hopefully cross referncing those will let you look at it the right way and it will fall into place. That's what I did. If it wasn't in the car already I'd take a pic, sorry.