View Single Post
Old 05-28-2009, 10:11 AM   #195 (permalink)
jpit
Enthusiast Member
 
Join Date: Feb 2009
Location: Washington State
Posts: 440
Drives: 370Z Tour MT w/Spt
Rep Power: 16
jpit will become famous soon enough
Default

Early in this thread Sylenze questioned what effect the bumper would have on the dyno numbers of the G3.
370z.com magazine did a comprehensive test and came up with this conclusion:

"When running on the dyno, the Stillen intake produced on the average 3 more whp but less torque at 270 whp and 216 lb/ft with the power gains coming high in the powerband above 6700 rpm. Below 6700 rpm, the Stillen Intake lost a slight bit of power and torque. This isn’t the whole story though. For the sake of curiosity, we removed the front bumper fascia and ran the car with the airflow of the dyno’s cooling fan blowing straight on the filters. We were amazed to see that the Stillen intake belt out an additional 10 whp nearly completely across the board! Not believing our eyes, we ran the car with the bumper cover off for many pulls and the numbers repeated. We then replaced the bumper cover and the power numbers dropped to what they had been."
jpit is offline   Reply With Quote