Nissan 370Z Forum - View Single Post - Berk HFC's + Stillen CBE = RAAAAAAASSSSPPPPP

atx370z · 10-26-2010, 03:52 PM

I checked the u-bolts.. they are all very tight. The bolted connections look good. The crossmember was touching, but i fixed that right away when i first got the exhaust installed.

There's no rasp unless i give it half to full throttle and its only for about 1k to 2k rpm's right in the middle of the rpm range. Up top theres no rasp. Its pretty gnarly rasp too.

I got a video of a dyno run ill try and upload. Not sure how good you can hear it, though. The quality sucks. Taken with iPhone.

10-26-2010, 03:52 PM	#12 (permalink)
atx370z Track Member Join Date: Aug 2010 Location: Austin, TX Posts: 637 Drives: 10 370Z T/S M6 Rep Power: 16	I checked the u-bolts.. they are all very tight. The bolted connections look good. The crossmember was touching, but i fixed that right away when i first got the exhaust installed. There's no rasp unless i give it half to full throttle and its only for about 1k to 2k rpm's right in the middle of the rpm range. Up top theres no rasp. Its pretty gnarly rasp too. I got a video of a dyno run ill try and upload. Not sure how good you can hear it, though. The quality sucks. Taken with iPhone. __________________ Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's