Nissan 370Z Forum - View Single Post

zero · 10-25-2010, 11:45 PM

Quote:

Originally Posted by Elia Cid

Zero , thanks!

I ‘m just wondering why such a huge difference in OEM front bar numbers?

Stillen front sway bar hole is 720 lbs. and is only rated at 28.6% stiffer?

Eibach front 1st hole 730 lbs. just 10 lbs. difference and its rated at a whopping 176 % stiffer?

Hotchkis front, 1st hole is even larger by 29% for a total of 205 %

I also found interesting the #2 hole is almost equal in lbs. but really off in actual % numbers.

Stillen rear bar #2 , 920 lbs. 70% stiffer.

Hotchiks rear bar #2, ? lbs. 75% stiffer.

Eibach rear bar # 3 is only 860 lbs. 60 lbs. less then Stillen and is rated at 230 %, 160% higher then Stillen?

I’m I reading this wrong?

Thanks,

Alex

The Stillen numbers might have posted incorrectly. 28.6% stiffer will give 535 lbs/in. Should it be ~70+% stiffer? Someone might want to ask Stillen to confirm it.

Here is a conversion to percentage on Eibach.

OEM front : 26.5mm - 416 lbs/in
rear: 24.3mm - 374 lbs/in

Eibach
32mm OD front : 1st hole - ~176% (730 lbs/in) >>> ~76% stiffer than OE
2nd hole - ~217% (900 lbs/in) >>>>> 117 stiffer than OE

29mm OD rear : 1st hole - ~167% (625 lbs/in) >>>> 67% stiffer than OE
2nd hole - ~198% (741 lbs/in) >>>> 98% stiffer than OE
3rd hole - ~230% (860 lbs/in) >>>> 130% stiffer than OE