Nissan 370Z Forum - View Single Post

CBRich · 05-23-2009, 06:29 AM

Thanks a lot for your help. There is a relay I want to trigger and the whole thing should fit up under the dash. I'm planning to just run wires straight from the SRM switch to the relay, shouldn't be more than a few inches away.

Looks like Courtesy lists a part called "Mask - Switch Hole" as a separate piece from the whole trim ring. This would imply that the blank can be removed and replaced by the SRM switch. It's looking good, I'll have to order the switch and go from there.

05-23-2009, 06:29 AM	#3 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Thanks a lot for your help. There is a relay I want to trigger and the whole thing should fit up under the dash. I'm planning to just run wires straight from the SRM switch to the relay, shouldn't be more than a few inches away. Looks like Courtesy lists a part called "Mask - Switch Hole" as a separate piece from the whole trim ring. This would imply that the blank can be removed and replaced by the SRM switch. It's looking good, I'll have to order the switch and go from there. Last edited by CBRich; 05-23-2009 at 06:37 AM.