Quote:
Originally Posted by bigaudiofanat
Lets wire it up
Wiring for rear camera.
 |
I have the Pioneer ND-BC4 camera. I just briefly looked at the wiring, it only appears to just have power and ground that you have to attach. You don't have to run the purple wire to that module. I assume the stereo does the switching rather than that little module thing.
Extra wire from camera all cleaned up.
Matt is the reverse wire easy to find under the center console? Also is the speed wire for the pink wire on the Pioneer harness near there or is it tapped elsewhere?
Quote:
Originally Posted by bigaudiofanat
Small gap for camera wire.
Pink wire, blue wire "on other layer" and black wire for metra controls.
NO GAP with dash kit.
 |
I like that, may have to use your idea for routing the cam wire.
That is the harness that goes into the stock radio right? Not the Metra/Scosche Nissan harness you mate with the Pioneer harness. I got a PAC SWI-PS and the instructions are a little vague on that. Since there is no steering wheel wires on the Scosche harness I assume the 2 white wires everyone mentiones that you have to add resistors to for the PAC is on that one in your pic right (factory Nissan plug)?
Great fit.