Nissan 370Z Forum - View Single Post - So I did the baggie test after I clay barred the whole car.

Cmike2780 · 10-13-2010, 10:05 PM

How much claying passes did you do? and what kind of clay are you using? Its a lot of work and it took me over 6 hours to get the paint smooth. I would try focusing on a single small panel, using a lot of detail spray, work the area until you get the result you want. You should feel the clay "grab" any contaminants. You need pressure, but not so much where it stops the clay from moving freely.

Make sure your baggie is clean also.

10-13-2010, 10:05 PM	#23 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	How much claying passes did you do? and what kind of clay are you using? Its a lot of work and it took me over 6 hours to get the paint smooth. I would try focusing on a single small panel, using a lot of detail spray, work the area until you get the result you want. You should feel the clay "grab" any contaminants. You need pressure, but not so much where it stops the clay from moving freely. Make sure your baggie is clean also. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]