Nissan 370Z Forum - View Single Post - DIY: Cheap in-car camera mount

Seether13 · 09-26-2010, 10:25 AM

So today I started to make mine.

I went for the inside posts only. I used heat shrink rubber on the u-brackets followed by normal insulation tape.

Here is some work in progress shots

Next up:

I am going to spray the bracket black and get some rubber material to place in the middle of the U-brackets on the alu tubing which will help with the tightening against the headrest post

Tomorrow I will try and get a camera bracket to attach to the tubing. I intend to get one that I can still move up and down and sideways

09-26-2010, 10:25 AM	#27 (permalink)
Seether13 Base Member Join Date: Sep 2010 Location: Jhb, South Africa Age: 49 Posts: 89 Drives: 09 Nissan 370Z M6 Rep Power: 15	So today I started to make mine. I went for the inside posts only. I used heat shrink rubber on the u-brackets followed by normal insulation tape. Here is some work in progress shots Next up: I am going to spray the bracket black and get some rubber material to place in the middle of the U-brackets on the alu tubing which will help with the tightening against the headrest post Tomorrow I will try and get a camera bracket to attach to the tubing. I intend to get one that I can still move up and down and sideways Last edited by Seether13; 09-26-2010 at 10:47 AM.