Hey man i did this the other week....Its pretty easy once you learn how to do it. So I would recommend that you open the door all the way open... on the harness you'll see a lever. This will need to be pulled down. My mistake was that I was not pulling it all the way down. It helps if you close the door a little bit from being all the way open. This will allow for the lever to clear the door. ONce the lever is all the way down it should pop right off. The next step would be to unplug the other end of the harness from the inside of the cabin so that you can drill out a hole for the wire that is to go through. You'll see the empty spot where you can do this. Hope this helps. Let me know if you have any questions.
|