Josh@STILLEN

Awesome.. So I'm sure in your tenure with Nissan and being an Nissan enthusiast you would be familiar with Steve Millen, his enormous success with Nissan with the IMSA Sports Car Series, and STILLEN's longstanding devotion to creating quality products, especially for the Z cars, where countless hours of R&D have been allocated to create, dyno test and tune (both for horsepower and sound) products such as exhaust systems designed to provide maximum power at a competitive price.

We always appreciate editorial on our products, and are always open to discuss our process (within reason, some things must remain in R&D to not hand the keys to the castle away.. ), a simple phone call could have assisted in some background information on the exhaust design.

Making assumptions on the design elements and their reason for function, without doing extensive development testing to back the statements up, borderline as irresponsible as the general consumer can interpret that statement as fact, such as what you've seen happen in this very post, due to the story you've written and the liberties you've taken.

That's also fueled by the inconsistency in every other dyno being run by numerous forum members, including the results from the owner of the other 370Z tested at that same facility, on the same dyno.

So in regards to the specific caption from your article.. "The Stillen 370Z exhaust goes from 2.5 inches in diameter to 2.25 inches and back again in several places along the flow path. If it were 2.5 inches all the way through, it would make more power" is incorrect and irresponsible, the exhaust was designed as is for a reason, and a good one, horsepower and tone.

My statements are based on making an assumption in saying you have not designed a specific exhaust system for the 370Z and have not tested the effects of tubing sizes and their effect on power and sound.. if I'm incorrect on that point I apologize.