View Single Post
Old 09-04-2010, 08:18 AM   #72 (permalink)
jnaut
A True Z Fanatic
 
jnaut's Avatar
 
Join Date: Dec 2009
Location: wpb, fl
Posts: 1,146
Drives: 09 370z
Rep Power: 17
jnaut will become famous soon enough
Default

Quote:
Originally Posted by 1slow370 View Post
for a scavenge pump RB racing makes a great bronze gear pump designed for oil system use. The pumps are so over built you could use them as a seperate supply pump at 3 GPM at 30psi. the also have the supply line restrictors, backflow valves, and hell in line turbo oil filters if you wnat to run those too. remember a ball bearing turbo likes 30psi of oil pressure journal bearings a bit more. Don't skimp on the oiling like sts did or you'll be doing what i am right now, trying to improve it so the seals don't bypass oil at low throttle. Rear mounts are hard on ring seals, if your turbo has carbon seals you won't have as much of a problem.
I have already ordered the scavenge pump, as for the oil feed /return line. running 4-AN braided stainless line and 8-AN push lock oil return line.

Base-Model Pump
__________________
Best 1/4 mile 12.24 Best mph 114.5_______
jnaut is offline   Reply With Quote