Nissan 370Z Forum - View Single Post

texasviking · 08-26-2010, 04:50 PM

It seems like you could easily make these out of wood for the cost of 2 4x4x8' pieces of wood and some screws/glue...

1. Cut each 4x4x8' 8 equal length pieces
2. Make template that matches outer curvature of tire (including ramp and flat spot so you can drive up and into the dip)
3. Use a band saw to make the cuts
4. (Repeat 4x) - Attach 3 pieces together to make a 12" wide ramp

Edit: this would only use 12 of the 16 pieces... so if you NEEEED 16" wide ramps, just connect 4 pieces together :P

08-26-2010, 04:50 PM	#11 (permalink)
texasviking Base Member Join Date: Feb 2010 Location: DFW Posts: 160 Drives: 09 370Z Rep Power: 15	It seems like you could easily make these out of wood for the cost of 2 4x4x8' pieces of wood and some screws/glue... 1. Cut each 4x4x8' 8 equal length pieces 2. Make template that matches outer curvature of tire (including ramp and flat spot so you can drive up and into the dip) 3. Use a band saw to make the cuts 4. (Repeat 4x) - Attach 3 pieces together to make a 12" wide ramp Edit: this would only use 12 of the 16 pieces... so if you NEEEED 16" wide ramps, just connect 4 pieces together :P Last edited by texasviking; 08-26-2010 at 04:53 PM. Reason: explaination