Nissan 370Z Forum - View Single Post - DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

Nitex · 08-24-2010, 02:15 PM

^^ mythic, if the dealer can prove or hypothesize in any way that your after market parts are the cause of any problems then the issue will not be fixed under factory warranty. You may be able to fight this, as the aftermarket parts MUST be the cause for the dealer to void that part of the warranty.

And yes, there is a noticeable change in the power delivery. As you gain a good bit of HP on the top end, and loose a few down low.

I over sized my passenger hole, and my intake loosely fits. I fab'd a bracket to the bolt location right next to the tube, and then later took it off. I need to come up with a better solution before i cause any damage from vibration, could already be to late.

08-24-2010, 02:15 PM	#29 (permalink)
Nitex Track Member Join Date: Jan 2010 Location: Seattle Posts: 848 Drives: '13 GTI Stage 2 UNI Rep Power: 16	^^ mythic, if the dealer can prove or hypothesize in any way that your after market parts are the cause of any problems then the issue will not be fixed under factory warranty. You may be able to fight this, as the aftermarket parts MUST be the cause for the dealer to void that part of the warranty. And yes, there is a noticeable change in the power delivery. As you gain a good bit of HP on the top end, and loose a few down low. I over sized my passenger hole, and my intake loosely fits. I fab'd a bracket to the bolt location right next to the tube, and then later took it off. I need to come up with a better solution before i cause any damage from vibration, could already be to late. __________________ 2013 Drivers ED GTI \| Stage 2 Unitronic Last edited by Nitex; 08-24-2010 at 02:17 PM.