zatzuma, i see you took off the fender liner. no doubt that gave more room to route the lines. i just left the fender liner in place, so i pretty much had to route my lines under the washer bottle. the way you routed the lines probably also helped to connect them to the sandwich plate from the top side. in my case if i wanted to do the same i would have had to twist and contort the lines too much due to their lower position. by the way, what was the difference in length between the two lines in your kit? they seem to have the same amount of slack. in my case the longer line had much more slack than the shorter line.
__________________
2009 370z Sport Touring/Nismo shift Knob/Z1 motorsports 34 row oil cooler
|