Quote:
Originally Posted by Dembflyr
So here are my pics.
Left tip is slightly lower
Here is part of the reason.
The right side looks ok, but it could be in there a bit more in my opinion.
Here is the left side in the rubber mount.
The bracket could be more level.
I modified the bracket and moved it about an inch to the right. I also bent the resonator hanger up a bit.
Much better.
But there is still a problem. I then removed the muffler and bent the left bracket down as far as I dared. That helped but not perfect.
So there you have it. This took me less than an hour to get this worked out.
I am even more happy with this exhaust now.
I am glad that I gave Berk the chance to make things right to those of us who waited. Rob contacted me about these issues before I even had a chance to contact him. I think that shows that Berk has turned a corner as far as their customer service is concerned. |
The thing i was uncomfortable in posting was this! About the resonator hanger, and sliding it over that inch. Since you did post it and come to your own on it i guess i can comfortably say it. haha. I just dont want the finger pointer at me for it.
Glad to see you got it all worked out! I still have a little fiddling to do, but i am not sure if i am going to use the shim idea or got with some hose clamps around the bushings. i will probably do the second idea, and i plan on lowering the car a little, and the roads here are not the most friendly even at stock height.